Canadian Spring Wheat varieties - June 2021 to December 2021

Wheat, Canada Western Red Spring (CWRS)

The Canadian Grain Commission establishes the class Wheat, Canada Western Red Spring (CWRS) and designates the varieties of wheat listed below to be in the CWRS class:

  • AAC Alida
  • AAC Bailey
  • AAC Brandon
  • AAC Broadacres
  • AAC Cameron
  • AAC Connery
  • AAC Elie
  • AAC Hockley
  • AAC Hodge
  • AAC Jatharia
  • AAC LeRoy
  • AAC Magnet
  • AAC Prevail
  • AAC Redberry
  • AAC Redstar
  • AAC Redwater Footnote 1
  • AAC Russell
  • AAC Starbuck
  • AAC Tisdale
  • AAC Viewfield
  • AAC W1876
  • AAC Warman
  • AAC Wheatland
  • AC Barrie
  • AC Cadillac
  • AC Domain Footnote 1
  • AC Elsa
  • AC Intrepid
  • AC Splendor
  • Bolles
  • Carberry
  • Cardale
  • CDC Abound
  • CDC Adamant
  • CDC Alsask
  • CDC Bounty
  • CDC Bradwell
  • CDC Go
  • CDC Hughes
  • CDC Imagine
  • CDC Kernen
  • CDC Landmark
  • CDC Ortona
  • CDC Pilar CLPlus
  • CDC Plentiful
  • CDC Silas Footnote 13
  • CDC Skrush
  • CDC Stanley
  • CDC Succession CLPlus
  • CDC Teal
  • CDC Thrive
  • CDC Titanium
  • CDC Utmost
  • CDC VR Morris
  • Coleman
  • Daybreak
  • Ellerslie
  • Fieldstar
  • Glenn
  • Go Early
  • Goodeve
  • Helios
  • Infinity
  • Jake
  • Journey
  • Laura
  • Lovitt
  • Muchmore Footnote 1
  • Parata
  • Peace
  • Prodigy
  • Rednet
  • Roblin
  • Shaw
  • Sheba
  • Somerset
  • Stettler
  • Superb
  • SY Brawn Footnote 2
  • SY Cast Footnote 2
  • SY Chert
  • SY Crossite Footnote 2
  • SY Gabbro
  • SY Obsidian
  • SY Slate
  • SY Sovite
  • SY Torach
  • SY 433
  • SY479 VB
  • SY637
  • Thorsby
  • Tracker
  • Vesper Footnote 1
  • Waskada
  • WR859 CL
  • Zealand
  • 5500HR
  • 5600HR
  • 5601HR
  • 5602HR
  • 5604HR CL
  • 5605HR CL Footnote 1

This order comes into effect on the later of the crop year commencing August 1, 2020 or the signing date, and is in effect until July 31, 2021, unless revoked earlier. The list was amended on June 18, 2021.

Wheat, Canada Northern Hard Red (CNHR)

The varieties of wheat listed below are designated to be in the CNHR class:

  • AAC Concord
  • AAC Tradition
  • AC Abbey
  • AC Cora
  • AC Crystal
  • AC Eatonia
  • AC Foremost
  • AC Majestic
  • AC Michael
  • AC Minto
  • AC Taber
  • Alikat
  • Alvena
  • CDC Cordon CLPlus
  • CDC Makwa
  • CDC Osler
  • Columbus
  • Conquer
  • Conway
  • Elgin ND
  • Faller
  • Harvest
  • Kane
  • Katepwa
  • Leader
  • Lillian
  • McKenzie
  • Neepawa
  • Oslo
  • Park
  • Pasqua
  • Pembina
  • Prosper
  • Shelly Footnote 3
  • Thatcher
  • Unity
  • 5603HR

This order comes into effect on the later of the crop year commencing August 1, 2020 or the signing date, and is in effect until July 31, 2021, unless revoked earlier.

Wheat, Canada Prairie Spring Red (CPSR)

The Canadian Grain Commission establishes the class Wheat, Canada Prairie Spring Red (CPSR) and designates the varieties of wheat listed below to be in the CPSR class:

  • AAC Castle
  • AAC Crossfield
  • AAC Crusader
  • AAC Entice
  • AAC Foray
  • AAC Goodwin
  • AAC Penhold
  • AAC Perform Footnote 11
  • AAC Ryley
  • AAC Tenacious
  • Accelerate
  • CDC Reign
  • CDC Terrain
  • Cutler
  • Enchant
  • Forefront
  • SY Rorke Footnote 4
  • SY Rowyn
  • SY985
  • SY995
  • 5700PR
  • 5701PR
  • 5702PR

This order comes into effect on the later of the crop year commencing August 1, 2020 or the signing date, and is in effect until July 31, 2021, unless revoked earlier. The list was amended on May 27, 2021.

Wheat, Canada Prairie Spring White (CPSW)

The varieties of wheat listed below are designated to be in the CPSW class:

  • AC Karma
  • AC Vista

This order comes into effect on the later of the crop year commencing August 1, 2020 or the signing date, and is in effect until July 31, 2021, unless revoked earlier.

Wheat, Canada Western Extra Strong (CWES)

The varieties of wheat listed below are designated to be in the CWES class:

  • AC Corinne
  • Amazon
  • Bluesky
  • Burnside
  • CDC Rama
  • CDC Walrus
  • CDN Bison
  • Glenavon
  • Glencross
  • Glenlea
  • Laser
  • Wildcat

This order comes into effect on the later of the crop year commencing August 1, 2020 or the signing date, and is in effect until July 31, 2021, unless revoked earlier.

Wheat, Canada Western Hard White Spring (CWHWS)

The varieties of wheat listed below are designated to be in the CWHWS class:

  • AAC Cirrus
  • AAC Iceberg
  • AAC Tomkins
  • AAC Whitefox
  • AAC Whitehead Footnote 12
  • CDC Whitewood
  • Kanata
  • Snowbird
  • Snowstar
  • Whitehawk

This order comes into effect on the later of the crop year commencing August 1, 2020 or the signing date, and is in effect until July 31, 2021, unless revoked earlier. The list was amended on February 17, 2021.

Wheat, Canada Western Soft White Spring (CWSWS)

The varieties of wheat listed below are designated to be in the CWSWS class:

  • AAC Chiffon
  • AAC Indus
  • AAC Paramount
  • AC Andrew
  • AC Meena
  • AC Nanda
  • AC Phil
  • AC Reed
  • Bhishaj
  • Sadash

This order comes into effect on the later of the crop year commencing August 1, 2020 or the signing date, and is in effect until July 31, 2021, unless revoked earlier.

Wheat, Canada Eastern Red Spring (CERS)

The Canadian Grain Commission establishes the class Wheat, Canada Eastern Red Spring (CERS) and designates the varieties of wheat listed below to be in the CERS class:

This order comes into effect on the later of the crop year commencing August 1, 2020 or the signing date, and is in effect until July 31, 2021, unless revoked earlier. The list was amended on May 27, 2021.

Follow-up to Statistics Canada's 2021 Website Evaluation

Consultation Objectives

For the follow-up to Statistics Canada's 2021 Website Evaluation survey, Statistics Canada will conduct a return evaluation of its website. During July, August and September 2021 we will gather additional feedback from visitors on:

  • success in finding information and completing tasks
  • areas of improvement for the website.

The feedback will be used to help Statistics Canada improve its website.

How to get involved

Individuals who wish to obtain more information or want to take part in the consultation may contact us by email at statcan.websitesatisfaction-satisfactiondusiteweb.statcan@statcan.gc.ca.

Please note that Statistics Canada selects participants for each consultation to ensure that feedback is sought from a representative sample of the target population for the study. Not all applicants will be asked to participate in a given consultation.

Statistics Canada is committed to respecting the privacy of consultation participants. All personal information created, held or collected by the agency is protected by the Privacy Act. For more information on Statistics Canada's privacy policies, please consult the privacy notice.

Results

Results of the follow-up visitor satisfaction evaluation will be published online when available.

Date modified:

Retail Trade Survey (Monthly): CVs for Total sales by geography - May 2021

CVs for Total sales by geography - April 2021
This table displays the results of Annual Retail Trade Survey: CVs for Total sales by geography - May 2021. The information is grouped by Geography (appearing as row headers), Month and Percent (appearing as column headers).
Geography Month
202105
%
Canada 0.8
Newfoundland and Labrador 1.5
Prince Edward Island 1.1
Nova Scotia 1.8
New Brunswick 1.8
Quebec 1.6
Ontario 1.8
Manitoba 1.3
Saskatchewan 2.6
Alberta 2.1
British Columbia 1.3
Yukon Territory 1.3
Northwest Territories 0.7
Nunavut 0.7

Data accuracy measures by type of shipment, Canada: 2018

Data accuracy measures by type of shipment, Canada
  2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008
All shipments a a a a a a a a a a a
Domestic shipments a b a a a a a a a a a
Transborder shipments b b b a b a a b a b b
Local shipments b b b b b b a b b b b
Long distance shipments a b a a a a a a a a a

The data accuracy measures are for the "weight" variable.

"a" is excellent; CV from 0.01% to 4.99%
"b" is very good; CV from 5.00% to 9.99%
"c" is good; CV from 10.00% to 14.99%
"d" is acceptable; CV from 15.00% to 24.99%
"e" is use with caution; CV from 25.00% to 49.99%
"f" is unreliable; CV is 50.00% or higher

Response Rate
  2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008
Unweighted response rate 94% 92% 92% 93% 92% 92% 92% 95% 93% 93% 93%

Wholesale Trade Survey (monthly): CVs for total sales by geography - May 2021

Wholesale Trade Survey (monthly): CVs for total sales by geography - May 2021
Geography Month
202005 202006 202007 202008 202009 202010 202011 202012 202101 202102 202103 202104 202105
percentage
Canada 0.8 0.7 0.7 0.7 0.7 0.5 0.6 0.8 0.8 0.7 0.6 0.7 0.9
Newfoundland and Labrador 0.4 0.1 0.2 0.4 0.4 0.4 0.4 0.4 0.6 0.5 0.2 1.2 2.4
Prince Edward Island 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Nova Scotia 5.5 2.5 2.1 1.9 1.7 2.7 3.4 6.3 1.8 1.7 2.6 4.8 8.1
New Brunswick 3.2 2.7 2.0 3.6 3.5 2.9 5.0 3.5 3.4 2.6 1.1 1.1 2.1
Quebec 1.9 2.0 1.7 2.3 1.9 1.5 1.4 1.7 1.8 1.8 1.9 1.8 3.1
Ontario 1.2 1.1 1.0 0.9 1.0 0.8 0.9 1.3 1.2 1.1 0.9 1.1 1.2
Manitoba 2.6 1.1 1.2 1.8 2.8 1.7 1.4 2.5 1.7 2.4 1.8 2.8 4.0
Saskatchewan 0.6 0.7 1.2 1.4 0.7 0.9 0.9 1.0 1.0 1.6 1.2 0.8 0.6
Alberta 2.9 2.5 2.3 1.9 3.4 1.3 1.3 1.7 1.0 1.2 1.1 1.2 1.4
British Columbia 1.8 1.6 1.3 1.9 1.8 1.4 1.5 1.4 1.5 1.4 1.5 1.3 1.3
Yukon Territory 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Northwest Territories 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Nunavut 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

Sex, Gender and Sexual Orientation Statistics

Sex, Gender and Sexual Orientation Statistics

Follow:

Sign up to My StatCan to get updates in real-time.

Gender Results Framework – Data tables

Introduced in Budget 2018, the Gender Results Framework (GRF) represents the Government of Canada's vision for gender equality, highlighting the key issues that matter most. It is a whole-of government tool designed to:

  • Track how Canada is currently performing
  • Define what is needed to achieve greater equality
  • Determine how progress will be measured going forward

Under this framework, the federal government has identified six key areas where change is required to advance gender equality.

Statistics Canada has compiled data on each of the indicators of the GRF as well as additional key indicators related to gender on Gender Results Framework – Data tables.

Features

Tested and trusted statistical standards

Statistical data and metadata standards are a set of rules about how data and metadata are managed, organized, represented, or formatted. They enable consistent and repeatable description, representation, structuring, and sharing of data and metadata.

Statistics Canada has many statistical standards used for collecting and publishing detailed data. For information on topic specific standards, please visit Gender, diversity and inclusion, and related standards and Gender, sex at birth, sexual orientation, and related standards. The Gender of Person Reference Guide and Sex at Birth of Person Reference Guide bring together information from multiple sources for a better understanding of terms and to promote standards adoption and interoperability of data.

All our statistical standards can be found through the Standards, data sources, and methods page.

2SLGBTQ+ definition

Whereas the Government of Canada adopted and encourages the use of the acronym 2SLGBTQI+ to refer to Two-Spirit, lesbian, gay, bisexual, transgender, queer and intersex people and those who use other terms related to gender or sexual diversity, Statistics Canada uses the acronym 2SLGBTQ+ for data analysis purposes as information is not yet specifically collected about intersex people in surveys.

Sustainable Development Goals and Gender Equality

Goal 5 - Gender equality of the UN Sustainable Development Goals is to achieve gender equality and empower all women and girls.

Gender in the international context

Responsible use of machine learning at Statistics Canada

By: Keven Bosa, Statistics Canada

More and more data are being generated on a daily basis. We need only think of data from cellphones, satellite imagery, web browsing or optical readers. The profusion of data is increasing the public's appetite for new, more detailed and timely statistics. Like many other national statistical organizations, Statistics Canada has embraced this new reality and is using more and more alternative data sources to improve and modernize its different statistical programs. Given their volume and speed, machine learning methods are often required to use these new data sources.

Statistics Canada has conducted many projects using machine learning methods over the past three years. For example, data scientists used natural language processing to assign a class to comments from respondents to the census and other surveys. Unsupervised learning methods were used to partition the Canadian Coroner and Medical Examiner Database into homogeneous groups to improve understanding of certain events. A supervised learning algorithm was developed to predict crop yield. Projects using neural networks on satellite images are currently underway to optimize the Agriculture Program. In one project, the goal is to detect the presence of greenhouses, while the other project aims to identify different types of field crops. An algorithm was also developed to extract financial information from PDF documents. The examples above give an idea of the variety of issues for which machine learning is used.

The use of machine learning has its benefits: the ability to process large amounts of unstructured data, automating existing processes, improved coverage and accuracy, and many more. However, it also raises several questions such as:

  • Does the process protect data integrity and confidentiality?
  • Is the quality of the training data adequate for the desired objective?
  • Once the algorithm is in place, who is responsible for the results and their effects?

Following these questions and the increased use of machine learning methods at Statistics Canada, the Modern Statistical Methods and Data Science Branch recognized the need for a framework to guide the development of machine learning processes and to make them responsible processes.

The Framework for Responsible Machine Learning Processes at Statistics Canada will be presented in this article, followed by a brief explanation of the review process put in place to implement the Framework. Finally, this article will conclude with some thoughts regarding future work.

Presentation of the Framework

Before presenting the framework adopted by Statistics Canada, we will give a brief overview of the Treasury Board Secretariat's Directive on Automated Decision-Making, which was the subject of an article in the June issue of the newsletter. It states that: "The objective of this Directive is to ensure that Automated Decision Systems are deployed in a manner that reduces risks to Canadians and federal institutions, and leads to more efficient, accurate, consistent, and interpretable decisions made pursuant to Canadian law." It also states that the Directive "... applies to any system, tool, or statistical models used to recommend or make an administrative decision about a client." At Statistics Canada, all projects that use machine learning or modelling, more generally, are part of a statistical program that does not aim to make administrative decisions about a client, at least not so far. As a result, Statistics Canada has not yet had to comply with this Directive and assess the impact of these decisions using the Algorithmic Impact Assessment Tool. However, as mentioned at the end of the previous section, Statistics Canada was proactive in adopting this Framework to ensure responsible use of machine learning at the agency.

Figure 1 provides a good overview of the Framework for Responsible Machine Learning Processes at Statistics Canada:

Framework for Responsible Machine Learning Processes

Description - Figure 1

Circular diagram depicting the four pivotal concepts for the production of trustworthy insight from responsible machine learning processes. Starting from the top left and moving clockwise:

Concept #1: Respect for People with attributes such as Value to Canadians; Prevention of harm; Fairness and Accountability.

Concept #2: Sound Application with attributes such as Transparency; Reproducibility of process and results.

Concept #3: Sound Methods with attributes such as Quality learning data; Valid inference; Rigorous modelling and Explainability.

Concept #4: Respect for Data with attributes such as Privacy; Security and Confidentiality.

Assessed through self-evaluation and peer review, using a checklist and producing a report or dashboard.

The Framework consists of guidelines for responsible machine learning, organized into four themes: Respect for People; Respect for Data; Sound Methods; and Sound Application. All four themes work together to ensure the ethical use of both the algorithms and the results of machine learning. These guidelines apply to all of Statistics Canada's statistical programs and projects that use machine learning algorithms, particularly those put into production. This includes supervised and unsupervised learning algorithms.

The theme Respect for People is described using four attributes.

  1. The concept of Value to Canadians in the context of machine learning means that its use must create added value, whether in the products themselves or through greater efficiency in the production process.
  2. Prevention of harm requires an awareness of the potential harm and meaningful dialogue with stakeholders, spokespersons and advocates prior to the implementation of a machine learning project.
  3. Fairness implies that the principle of proportionality between means and ends is respected, and that a balance is struck between competing interests and objectives. Fairness ensures that individuals and groups are free from unfair bias, discrimination and stigmatization.
  4. Accountability is the legal and ethical obligation on an individual or organization to be responsible for its activities and to disclose the results in a transparent manner. Algorithms are not accountable; somebody is accountable for the algorithms.

Statistics Canada takes data seriously. The theme of Respect for Data has three attributes: privacy of the people to whom the data pertain; security of information throughout the data lifecycle; and confidentiality of identifiable information.

  1. Privacy is the right to be left alone, to be free from interference, surveillance and intrusions. When acquiring sensitive information, governments have obligations with respect to the collection, use, disclosure and retention of personal information. Privacy generally refers to information about individual persons (definition from the Policy on Privacy and Confidentiality).
  2. Security is the arrangements organizations use to prevent confidential information from being obtained or disclosed inappropriately, based on assessed threats and risks. Security measures also protect the integrity, availability and value of the information assets. This includes both physical safeguards, such as restricted access to areas where the information is stored and used, and security clearances for employees, as well as technological safeguards to prevent unauthorized electronic access (definition from the Policy on Privacy and Confidentiality).
  3. Confidentiality refers to a protection not to release identifiable information about an individual (such as a person, business or organization). It implies a relationship of "trust" between the supplier of the information and the organization collecting it; this relationship is built on the assurance that the information will not be disclosed without the individual's permission or without due legal authority (definition from the Policy on Privacy and Confidentiality).

Sound application refers to implementing, maintaining and documenting machine learning processes in such a way that the results are always reliable and the entire process can be understood and recreated. This theme has two attributes: transparency and reproducibility of process and results.

  1. Transparency refers to having a clear justification for what makes this particular algorithm and learning data the most appropriate for the application under study. To achieve transparency, machine learning developers should create comprehensive documentation, including making code accessible and available to others, without compromising confidentiality or privacy.
  2. Reproducibility of process means that there is sufficient documentation and code sharing such that the machine learning process could be recreated "from scratch." Reproducibility of results means that the same results are reliably produced when all the operating conditions are controlled. There are no ad hoc or human intervention steps that could alter the results.

Sound methods are those that can be relied on to efficiently and effectively produce the expected results. Statistics Canada typically follows recognized protocols involving consultation with peers and experts, documentation and testing in developing sound methods. This theme has four attributes: quality of learning data; valid inference; rigorous modelling; and explainability.

  1. In the context of machine learning, the quality of learning data is measured by both the consistency and accuracy of labelled data. Coverage, meaning that the labels and descriptions cover the entire span of what the algorithm will encounter in production is also important to reduce the risk of bias or discrimination (fairness), and representativity in terms of the distribution of the input or feature variables is important for realistic measures of performance.
  2. Valid inference refers to the ability to extrapolate based on a sample to arrive at correct conclusions with a known precision about the population from which the sample was drawn. In the machine learning context, valid inference means that predictions made on never-before-seen data using the trained model are reasonably close to their respective true values in a high proportion, or in the case of categorical data, predictions are correct in a high proportion.
  3. Rigorous modelling in machine learning means ensuring that the algorithms are verified and validated. This will enable users and decision-makers to justifiably trust the algorithm in terms of fitness for use, reliability and robustness.
  4. An explainable model is one with sufficient documentation that it is clear how the results should be used, and what sorts of conclusions or further investigations can be supported. In other words, an explainable model is not a black box.

Review process

The review process consists of the implementation of the Framework. The focus is on projects with targets for using machine learning methods in one or more steps leading to the production of official statistics. The process includes three steps: self-assessment using the checklist; peer review; presentation of the project to the Modern Statistical Methods and Data Science Branch's Scientific Review Committee.

First, the team that developed the project using machine learning methods must conduct a self-assessment of the use of those techniques. To that end, the team must review the Framework and answer the questions in the checklist. The checklist is a questionnaire in which each guideline in the Framework is generally reformulated into one or more questions. That questionnaire and the project documentation and methods used are then sent to the review team.

Peer review can then begin. Reviewers from two different teams will be involved. The questions and the documentation on the first two themes of the Framework, Respect for People and Respect for Data, will be assessed by the Data Ethics Secretariat team while the section on the last two themes, Sound Application and Sound Methods, will be assessed by a team from the Data Science Methods and Quality Section. Following that assessment, a report containing recommendations will be sent to the project manager.

The final step in the review process is presenting the project to the Modern Statistical Methods and Data Science Branch's Scientific Review Committee. This presentation sets out the methodology used during the machine learning process before an expert panel. The role of this committee is to challenge the methodology, including identifying potential gaps or problems and proposing improvements and corrections. Ultimately, the committee will recommend whether or not to implement the proposed methodology for the production of official statistics.

What's next?

Is this the end of the story? No, it is actually the beginning. New data sources and machine learning methods are emerging almost every day. To remain relevant, the Framework presented in this article must be frequently adapted and revised to reflect emerging issues of ethics and quality. Statistics Canada continues to apply this Framework to machine learning processes and to be aware of applications where the Directive on Automated Decision-Making could apply. The agency is in the process of establishing a register of all applications that have gone through this review process so it can be easily referenced when requests arise. Do you have questions about the responsible use of certain machine learning methods? Are you required to submit your projects to the Treasury Board Secretariat's Directive and to submit an independent assessment of your application? At Statistics Canada, we have already done this type of review for another department using the Framework discussed in this article and are available to do other reviews if need be. Please contact statcan.dscd-ml-review-dscd-revue-aa.statcan@statcan.gc.ca.

Date modified:

Why do we conduct this survey?

The purpose of this survey is to obtain information on the expenditures made by industry to protect the environment in Canada. This information serves as an important indicator of Canadian investment in environmental protection.

Data from this survey are used by all levels of government in establishing informed environmental policies. The private sector also uses this information in the corporate decision-making process.

Your information may also be used by Statistics Canada for other statistical and research purposes.

Your participation in this survey is required under the authority of the Statistics Act.

Other important information

Authorization to collect this information

Data are collected under the authority of the Statistics Act, Revised Statutes of Canada, 1985, Chapter S-19.

Confidentiality

By law, Statistics Canada is prohibited from releasing any information it collects that could identify any person, business, or organization, unless consent has been given by the respondent, or as permitted by the Statistics Act. Statistics Canada will use the information from this survey for statistical purposes only.

Record linkages

To enhance the data from this survey and to reduce the reporting burden, Statistics Canada may combine the acquired data with information from other surveys or from administrative sources.

Data-sharing agreements

To reduce respondent burden, Statistics Canada has entered into data-sharing agreements with provincial and territorial statistical agencies and other government organizations, which have agreed to keep the data confidential and use them only for statistical purposes. Statistics Canada will only share data from this survey with those organizations that have demonstrated a requirement to use the data.

Section 11 of the Statistics Act provides for the sharing of information with provincial and territorial statistical agencies that meet certain conditions. These agencies must have the legislative authority to collect the same information, on a mandatory basis, and the legislation must provide substantially the same provisions for confidentiality and penalties for disclosure of confidential information as the Statistics Act. Because these agencies have the legal authority to compel businesses to provide the same information, consent is not requested and businesses may not object to the sharing of the data.

For this survey, there are Section 11 agreements with the provincial and territorial statistical agencies of Newfoundland and Labrador, Nova Scotia, New Brunswick, Quebec, Ontario, Manitoba, Saskatchewan, Alberta, British Columbia and the Yukon. The shared data will be limited to information pertaining to business establishments located within the jurisdiction of the respective province or territory.

Section 12 of the Statistics Act provides for the sharing of information with federal, provincial or territorial government organizations. Under Section 12, you may refuse to share your information with any of these organizations by writing a letter of objection to the Chief Statistician, specifying the organizations with which you do not want Statistics Canada to share your data and mailing it to the following address:

  • Chief Statistician of Canada
  • Statistics Canada
  • Attention of Director, Enterprise Statistics Division
  • 150 Tunney's Pasture Driveway
  • Ottawa, Ontario
  • K1A 0T6

You may also contact us by email at statcan.esdhelpdesk-dsebureaudedepannage.statcan@statcan.gc.ca or by fax at 613-951-6583.

For this survey, there are Section 12 agreements with Natural Resources Canada; Innovation, Science and Economic Development Canada; Sustainable Development Technology Canada; and the statistical agencies of Prince Edward Island, the Northwest Territories and Nunavut.

For agreements with provincial and territorial government organizations, the shared data will be limited to information pertaining to business establishments located within the jurisdiction of the respective province or territory.

Reporting instructions

  • Please print in ink.
  • This survey requires all environmental protection expenditures to be reported, whether or not they are in response to current or anticipated Canadian or international regulations, conventions or voluntary agreements.
  • Please report expenditures made by the establishment listed above.
  • Report all dollar amounts in Canadian dollars (CAN$), rounded to the nearest dollar.
  • Percentages should be rounded to whole numbers.
  • When precise figures are not available, provide your best estimates.
  • Enter '0' if there is no value to report.

Business or organization and contact information

1. Verify or provide the business or organization's legal and operating name and correct where needed.

Note: Legal name modifications should only be done to correct a spelling error or typo.

Legal Name

The legal name is one recognized by law, thus it is the name liable for pursuit or for debts incurred by the business or organization. In the case of a corporation, it is the legal name as fixed by its charter or the statute by which the corporation was created.

Modifications to the legal name should only be done to correct a spelling error or typo.

To indicate a legal name of another legal entity you should instead indicate it in question 3 by selecting 'Not currently operational' and then choosing the applicable reason and providing the legal name of this other entity along with any other requested information.

Operating Name

The operating name is a name the business or organization is commonly known as if different from its legal name. The operating name is synonymous with trade name.

  • Legal name
  • Operating name (if applicable)

2. Verify or provide the contact information of the designated business or organization contact person for this questionnaire and correct where needed.

Note: The designated contact person is the person who should receive this questionnaire. The designated contact person may not always be the one who actually completes the questionnaire.

  • First name
  • Last name
  • Title
  • Preferred language of communication
    • English
    • French
  • Mailing address (number and street)
  • City
  • Province, territory or state
  • Postal code or ZIP code
  • Country
  • Email address
  • Telephone number (including area code)
  • Extension number (if applicable)
  • The maximum number of characters is 10.
  • Fax number (including area code)

3. Verify or provide the current operational status of the business or organization identified by the legal and operating name above.

  • Operational
  • Not currently operational
    Why is this business or organization not currently operational?
    • Seasonal operations
      • When did this business or organization close for the season?
        • Date
      • When does this business or organization expect to resume operations?
        • Date
    • Ceased operations
      • When did this business or organization cease operations?
        • Date
      • Why did this business or organization cease operations?
        • Bankruptcy
        • Liquidation
        • Dissolution
        • Other - Specify the other reasons for ceased operations:
    • Sold operations
      • When was this business or organization sold?
        • Date
      • What is the legal name of the buyer?
    • Amalgamated with other businesses or organizations
      • When did this business or organization amalgamate?
        • Date
      • What is the legal name of the resulting or continuing business or organization?
      • What are the legal names of the other amalgamated businesses or organizations?
    • Temporarily inactive but will re-open
      • When did this business or organization become temporarily inactive?
        • Date
      • When does this business or organization expect to resume operations?
        • Date
      • Why is this business or organization temporarily inactive?
    • No longer operating due to other reasons
      • When did this business or organization cease operations?
        • Date
      • Why did this business or organization cease operations?

4. Verify or provide the current main activity of the business or organization identified by the legal and operating name above.

Note: The described activity was assigned using the North American Industry Classification System (NAICS).

This question verifies the business or organization's current main activity as classified by the North American Industry Classification System (NAICS). The North American Industry Classification System (NAICS) is an industry classification system developed by the statistical agencies of Canada, Mexico and the United States. Created against the background of the North American Free Trade Agreement, it is designed to provide common definitions of the industrial structure of the three countries and a common statistical framework to facilitate the analysis of the three economies. NAICS is based on supply-side or production-oriented principles, to ensure that industrial data, classified to NAICS, are suitable for the analysis of production-related issues such as industrial performance.

The target entity for which NAICS is designed are businesses and other organizations engaged in the production of goods and services. They include farms, incorporated and unincorporated businesses and government business enterprises. They also include government institutions and agencies engaged in the production of marketed and non-marketed services, as well as organizations such as professional associations and unions and charitable or non-profit organizations and the employees of households.

The associated NAICS should reflect those activities conducted by the business or organizational units targeted by this questionnaire only, as identified in the 'Answering this questionnaire' section and which can be identified by the specified legal and operating name. The main activity is the activity which most defines the targeted business or organization's main purpose or reason for existence. For a business or organization that is for-profit, it is normally the activity that generates the majority of the revenue for the entity.

The NAICS classification contains a limited number of activity classifications; the associated classification might be applicable for this business or organization even if it is not exactly how you would describe this business or organization's main activity.

Please note that any modifications to the main activity through your response to this question might not necessarily be reflected prior to the transmitting of subsequent questionnaires and as a result they may not contain this updated information.

The following is the detailed description including any applicable examples or exclusions for the classification currently associated with this business or organization.

Description and examples

  • This is the current main activity
    • Provide a brief but precise description of this business or organization's main activity
    • e.g., breakfast cereal manufacturing, shoe store, software development
  • This is not the current main activity

Main activity

5. You indicated that is not the current main activity.

Was this business or organization's main activity ever classified as: ?

  • Yes
    • When did the main activity change?
    • Date
  • No

6. Search and select the industry classification code that best corresponds to this business or organization's main activity.

Select this business or organization's activity sector (optional)

  • Farming or logging operation
  • Construction company or general contractor
  • Manufacturer
  • Wholesaler
  • Retailer
  • Provider of passenger or freight transportation
  • Provider of investment, savings or insurance products
  • Real estate agency, real estate brokerage or leasing company
  • Provider of professional, scientific or technical services
  • Provider of health care or social services
  • Restaurant, bar, hotel, motel or other lodging establishment
  • Other sector

Solid waste management

1. Report this establishment's capital expenditures and operating expenses for non-hazardous and hazardous solid waste management during the 2020 fiscal year.

Include expenditures related to:

  • non-hazardous and hazardous solid waste collection, transport, treatment, storage, disposal, recycling, and composting
  • on-site preparation of materials for recycling at an off-site facility done by your establishment's employees and services provided by a private contractor or a federal, provincial or local government body
  • assessments and audits
  • activities related to measurement, control, laboratories
  • municipal services
  • both own-account expenses (e.g., employee wages and salaries) and purchased goods and services.

Exclude expenditures on:

  • on-site recycling
  • sewage or wastewater management (to be reported in question 5)
  • treatment of high-level radioactive waste (to be reported in question 25).

Report $0 for the two categories of expenditures if your establishment is located on a rental property, and that these expenditures are included in the rent paid to the owner of the building.

To report operating expenses:

Include all expenses related to environmental protection incurred for labour, materials and supplies, maintenance and repair, and purchased services (include fuel and electricity expenses for machinery and equipment whose sole purpose is to protect the environment).

Exclude depreciation on machinery and equipment.

To report capital expenditures:

Include all relevant outlays for machinery and equipment and their installation and repair that have been capitalized, as well as for the construction of non-residential facilities (contractors or own employees). For construction, include all costs associated with demolition, planning and design (such as engineering and consulting fees), any materials supplied to construction contractors for installation and any costs associated with the purchase of land that are neither amortized nor depreciated.

Exclude any provisions for future environmental liability.

If the expenditure is zero or if not applicable, enter '0' in the corresponding box. When precise figures are not available, provide your best estimate.

Note: This survey requires all environmental protection expenditures to be reported, whether or not they are in response to current or anticipated Canadian or international regulations, conventions or voluntary agreements.

To report operating expenses:

Include all expenses related to environmental protection incurred for labour, materials and supplies, maintenance and repair, and purchased services (include fuel and electricity expenses for machinery and equipment whose sole purpose is to protect the environment).

Exclude depreciation on machinery and equipment.

To report capital expenditures:

Include all relevant outlays for machinery and equipment and their installation and repair that have been capitalized, as well as for the construction of non-residential facilities (contractors or own employees). For construction, include all costs associated with demolition, planning and design (such as engineering and consulting fees), any materials supplied to construction contractors for installation and any costs associated with the purchase of land that are neither amortized nor depreciated.

Exclude any provisions for future environmental liability.

Environmental protection expenditures:

All operating expenses and capital and repair expenditures whose primary purpose is the prevention, reduction or elimination of pollution and/or other forms of degradation of the environment as well as measures taken to restore the environment from a degraded state. This includes expenditures that this specific establishment incurred for pollution prevention, abatement and control; solid waste management; wastewater management; protection and remediation of soil, groundwater and surface water; protection and restoration of biodiversity and habitat; environmental monitoring; environmental assessments and audits; relevant training and administrative costs, etc.

Exclude expenditures made to improve employee health, workplace safety, and site beautification. Expenses incurred to produce pollution prevention or abatement and control equipment for sale are also excluded as they would appear twice in the expenditure data produced by Statistics Canada. Expenditures for environment-related research and development are also excluded since they are collected elsewhere in Statistics Canada.

Report this establishment's capital expenditures and operating expenses for non-hazardous and hazardous solid waste management during the 2020 fiscal year.
  CAN$
Capital expenditures  
Operating expenses  
Total expenditures  

2. Of the total expenditures reported in question 1, report the proportion spent on purchased goods, technologies and services.

Purchased goods, technologies and services are goods, technologies and services provided by an outside company or service provider. They exclude in-house or own-account expenditures, such as employee wages and salaries.

When precise figures are not available, provide your best estimate.

Percentage spent

3. Which of the following goods and technologies related to solid waste management were purchased by this establishment during the 2020 fiscal year?

Select all that apply.

  • Collection vehicles for waste, recycling and organics
  • Containers for collection of waste, recycling and organics
  • Other recycling equipment used in collection
  • Separating and sorting-related goods and technologies - e.g., air classifiers, magnetic separators, eddy current separators
  • Compaction-related goods and technologies - e.g., balers, densifiers, compactors, shredders, granulators
  • Centralized biological reprocessing technologies - e.g., centralized composters
  • Equipment for landfill leachate collection and containment
  • Equipment for landfill gas management
  • Equipment for thermal treatment - e.g., rotary kiln incinerator, mass burning, starved air incinerator, fluidized bed
  • Other solid waste management goods or technologies - Specify other solid waste management goods or technologies:
  • No purchases

4. Which of the following services related to solid waste management (i.e., waste, recycling and organics) were used by this establishment during the 2020 fiscal year?

Select all that apply.

  • Solid waste collection and treatment services provided by a government body (paid in taxes, like municipal taxes) - Include services offered by government bodies (e.g., municipal waste collection) or by a private company hired by a government body to collect and manage solid waste
  • Solid waste collection and treatment services provided by a private contractor - Include services provided by a private contractor hired by your establishment to collect and manage solid waste - e.g., GFL (Green for life), Wasteco
  • Solid waste collection and treatment services included in the rent (paid by the owner of the building)
  • Other solid waste management services - Specify other solid waste management services:
  • No services used

Wastewater management

5. Report this establishment's capital expenditures and operating expenses for wastewater management during the 2020 fiscal year.

Include expenditures related to:

  • prevention of wastewater through in-process modifications
  • wastewater treatment, including pollution abatement and control (end-of-pipe) processes
  • management of substances released to surface waters, municipal sewer systems, soil, or underground
  • treatment of cooling water for disposal
  • the installation of sewage infrastructure and expenditures related to the use, collection, treatment and disposal of sewage, including septic tanks
  • sewage services provided by a federal, provincial or local government body (e.g., municipal services)
  • handling and treatment of mine tailings
  • assessments and audits
  • activities related to measurement, control, laboratories
  • both own-account expenses (e.g., employee wages and salaries) and purchased goods and services.

Exclude expenditures on the protection of groundwater from pollutant infiltration and the cleaning up of soil and water bodies after pollution (to be reported in question 18).

Report $0 for the two categories of expenditures if your establishment is located on a rental property, and that these expenditures are included in the rent paid to the owner of the building

If the expenditure is zero or if not applicable, enter '0' in the corresponding box. When precise figures are not available, provide your best estimate.

Note: This survey requires all environmental protection expenditures to be reported, whether or not they are in response to current or anticipated Canadian or international regulations, conventions or voluntary agreements.

Report this establishment's capital expenditures and operating expenses for wastewater management during the 2020 fiscal year.
  CAN$
Capital expenditures  
Operating expenses  
Total expenditures  

6. Of the total expenditures reported in question 5, report the proportion spent on purchased goods, technologies and services.

Purchased goods, technologies and services are goods, technologies and services provided by an outside company or service provider. They exclude in-house or own-account expenditures, such as employee wages and salaries.

When precise figures are not available, provide your best estimate.

Percentage spent

Wastewater pollution abatement and control (end-of-pipe processes) is any method, technique, or process designed to manage and treat pollution after it is generated during the production process.

For example:

  • biological and chemical systems to treat water (such as water treatment plants)
  • filtration systems
  • cyclones
  • septic tanks, portable toilets
  • other barrier systems
  • treatment of cooling water before release
  • municipal, provincial or federal sewage services.

Wastewater pollution prevention (integrated processes) is any method, technique, or process that reduces or eliminates the amount of pollution generated during the production process i.e., before pollution is created. Pollution prevention activities can include equipment and technology modifications.

For example:

  • product design or reformulation to be less toxic upon use, release or disposal
  • equipment or process modifications (integrated processes)
  • recirculation, on-site recycling or reuse or recovery of polluting substances
  • materials or feedstock substitution, solvent reduction, elimination or substitution
  • improved inventory management or purchasing techniques
  • prevention of leaks and spills of polluting substances
  • improved operating practices or pollution prevention training.

7. Of the capital expenditures reported for wastewater management (question 5a), what proportion was spent on each of the following?

If the proportion is zero, enter '0' in the corresponding box. When precise figures are not available, provide your best estimate.

For both categories of wastewater management, exclude expenditures on the protection of groundwater from pollution infiltration and the cleaning up of soil and water bodies after pollution (to be reported under 'Protection and remediation of soil, groundwater and surface water').

Of the capital expenditures reported for wastewater management (question 5a), what proportion was spent on each of the following?
  Percentage
Pollution abatement and control (end-of-pipe)  
Pollution prevention (integrated processes)  
Total percentage  

8. Of the operating expenses reported for wastewater management (question 5b), what proportion was spent on each of the following?

If the proportion is zero, enter '0' in the corresponding box. When precise figures are not available, provide your best estimate.

Of the operating expenses reported for wastewater management (question 5b), what proportion was spent on each of the following?
  Percentage
Pollution abatement and control (end-of-pipe)  
Pollution prevention (integrated processes)  
Total percentage  

9. Which of the following goods and technologies related to wastewater management were purchased by this establishment during the 2020 fiscal year?

Select all that apply.

  • Tanks and related components for dilution or equalization, neutralization, sedimentation, chemical precipitation
  • Oil separators, skimmers used in industrial wastewater
  • Oil separators, skimmers in sewage treatment
  • Ion exchange beds
  • Air stripping tanks or columns
  • Liquid extraction columns
  • Micro-porous membrane adsorbers
  • Equipment for advanced chemical oxidation or UV radiation
  • Pre-treatment filters
  • Chemicals used in industrial wastewater treatment
  • Chemicals used in sewage treatment
  • Intake screens
  • Air sparging grit chambers
  • Tanks and related components for sedimentation, chemical precipitation or flocculation, aerobic biological treatment, aeration, clarification, disinfection
  • Membrane bioreactors
  • Trickling filters
  • Anaerobic digesters
  • Other goods and technologies related to wastewater management - Specify other goods and technologies related to wastewater management:
  • No purchases

10. Which of the following services related to wastewater management were used by this establishment during the 2020 fiscal year?

Select all that apply.

  • Wastewater management services provided by a government body (paid in taxes, like municipal taxes) - Include services offered by government bodies (e.g., municipal sewage) or by a private company hired by a government body to manage and treat wastewater
  • Wastewater management services provided by a private contractor - Include services provided by a private contractor hired by your establishment to manage wastewater - e.g., private company contracted to empty the sceptic tank
  • Wastewater management services included in the rent (paid by the owner of the building)
  • Other wastewater management services - Specify other wastewater management services:
  • No services used

Environmental protection

11. During the 2020 fiscal year, did this establishment have environmental protection expenditures in any of the following categories?

Include capital expenditures and operating expenses.

Report both own-account expenses (e.g., employee wages and salaries) and purchased goods and services.

Please select either "Yes" or "No" for each type of expenditure. Please do not leave any question blank.

During the 2020 fiscal year, did this establishment have environmental protection expenditures in any of the following categories?
  Yes No
Air pollution management    
Protection and remediation of soil, groundwater and surface water    
Protection of biodiversity and habitat    
Noise and vibration abatement    
Protection against radiation    
Environmental charges    
Other environmental protection activities    

Air pollution management

12. Report this establishment's capital expenditures and operating expenses for air pollution management during the 2020 fiscal year.

Include expenditures related to:

  • the management of pollutant emissions to the atmosphere, including greenhouse gases
  • both pollution prevention (integrated processes) and pollution abatement and control (end-of-pipe processes)
  • assessments and audits
  • activities related to measurement, control, laboratories
  • both own-account expenses (e.g., employee wages and salaries) and purchased goods and services.

Exclude expenditures related to:

  • workers' health and safety (e.g., maintenance of indoor air quality)
  • measures undertaken for cost-saving reasons, such as heat or energy savings (to be reported in question 31a)
  • the purchase of electric or hybrid vehicles (to be reported in question 31b)
  • the production of renewable or clean energy (to be reported in questions 31c and 31e)
  • the purchase of biofuels (to be reported in question 31d)
  • the purchase of renewable energy (not included in this survey).

If the expenditure is zero, enter '0' in the corresponding box. When precise figures are not available, provide your best estimate.

Report this establishment's capital expenditures and operating expenses for air pollution management during the 2020 fiscal year.
  CAN$
Capital expenditures  
Operating expenses  
Total expenditures  

13. Of the total expenditures reported in question 12, report the proportion spent on purchased goods, technologies and services.

Purchased goods, technologies and services are goods, technologies and services provided by an outside company or service provider. They exclude in-house or own-account expenditures, such as employee wages and salaries.

When precise figures are not available, provide your best estimate.

Percentage spent

Air pollution abatement and control (end-of-pipe processes) is any method, technique, or process designed to manage and treat pollution after it is generated during the production process.

For example:

  • scrubbers at the end of emission stacks
  • filtration systems
  • cyclones
  • other barrier systems.

Air pollution prevention (integrated processes) is any method, technique, or process that reduces or eliminates the amount of pollution generated during the production process i.e., before pollution is created. Pollution prevention activities can include equipment and technology modifications.

For example:

  • product design or reformulation to be less toxic upon use, release or disposal
  • equipment or process modifications (integrated processes)
  • recirculation, on-site recycling or reuse/recovery of air polluting substances
  • materials or feedstock substitution, solvent reduction, elimination or substitution
  • prevention of leaks of polluting substances
  • improved operating practices or pollution prevention training.

14. Of the capital expenditures reported for air pollution management (question 12a), what proportion was spent on each of the following?

If the proportion is zero, enter '0' in the corresponding box. When precise figures are not available, provide your best estimate.

Of the capital expenditures reported for air pollution management (question 12a), what proportion was spent on each of the following?
  Percentage
Pollution abatement and control (end-of-pipe)  
Pollution prevention (integrated processes)  
Total percentage  

15. Of the operating expenses reported for air pollution management (question 12b), what proportion was spent on each of the following?

If the proportion is zero, enter '0' in the corresponding box. When precise figures are not available, provide your best estimate.

Of the operating expenses reported for air pollution management (question 12b), what proportion was spent on each of the following?
  Percentage
Pollution abatement and control (end-of-pipe)  
Pollution prevention (integrated processes)  
Total percentage  

16. Which of the following goods and technologies related to air pollution management were purchased by this establishment during the 2020 fiscal year?

Select all that apply.

Physical or chemical treatment technologies

  • Filters and cyclones e.g., membrane, baghouse, granular bed
  • Electrostatic precipitators
  • Scrubbers e.g., venturi, spray tower, mechanical, plate tower, packed tower
  • Waste gas absorbers and waste gas flare or incinerators
  • Industrial catalytic converters
  • Pollutant recovery condensers
  • Adsorbers
  • Other physical or chemical treatment technologies - Specify other physical or chemical treatment technologies:
  • No purchases

Greenhouse gas control technologies

  • Clean coal processing technologies
  • Carbon capture and sequestration technologies and storage
  • Air and off-gas treatments e.g., oxidation, scrubbing, vapour phase carbon adsorption
  • Other greenhouse gas control technologies - Specify other greenhouse gas control technologies:
  • No purchases

Air quality and air pollution technologies

  • Low emitting burners e.g., low NOx, low SOx
  • Other air quality and air pollution technologies -Specify other air quality and air pollution technologies:
  • No purchases

Monitoring and compliance technologies

  • Leak detection technologies
  • Environmental measurement apparatus
  • Other monitoring and compliance technologies - Specify other monitoring and compliance technologies:
  • No purchases

17. Which of the following services related to air pollution management were purchased by this establishment during the 2020 fiscal year?

Select all that apply.

Greenhouse gas management services

  • Services for carbon credit trading, generation of compliance units, surplus allowances, emissions performance credits, and offset credits
  • Preparation of emissions reports and verification services
  • Allowance auctioning and exchange platform services
  • Market monitoring services
  • Offset protocol development and validation services
  • Services for the development of compliance systems and electronic emissions reporting systems
  • Other greenhouse gas management services - Specify other greenhouse gas management services:
  • No purchases

Air pollution management services

  • Measuring and monitoring services
  • Modelling and mapping services
  • Risk assessment and management services
  • Services for the development of compliance and electronic emissions reporting systems
  • Other air pollution management services - Specify other air pollution management services:
  • No purchases

Protection and remediation of soil, groundwater and surface water

18. Report this establishment's capital expenditures and operating expenses for the protection and remediation of soil, groundwater and surface water during the 2020 fiscal year.

Include expenditures related to:

  • prevention of pollutant infiltration
  • remediation or cleaning up of soil and water bodies
  • site reclamation and decommissioning (include decommissioning costs incurred in the 2020 fiscal year, even if the site was closed before this period)
  • protection of soil from erosion and other physical degradation
  • prevention and remediation of soil salinity
  • assessments and audits
  • activities related to measurement, control, laboratories
  • both own-account expenses (e.g., employee wages and salaries) and purchased goods and services.

Exclude expenditures related to:

  • wastewater management activities (to be reported in question 5)
  • protection of biodiversity and habitat (to be reported in question 21).

If the expenditure is zero, enter '0' in the corresponding box. When precise figures are not available, provide your best estimate.

Report this establishment's capital expenditures and operating expenses for the protection and remediation of soil, groundwater and surface water during the 2020 fiscal year.
  CAN$
Capital expenditures  
Operating expenses  
Total expenditures  

19. Of the total expenditures reported in question 18, report the proportion spent on purchased goods, technologies and services.

Purchased goods, technologies and services are goods, technologies and services provided by an outside company or service provider. They exclude in-house or own-account expenditures, such as employee wages and salaries.

When precise figures are not available, provide your best estimate.

Percentage spent

20. Which of the following goods and technologies related to protection and remediation of soil, groundwater and surface water were purchased by this establishment during the 2020 fiscal year?

Include machinery, equipment, products, and technologies.

Select all that apply.

  • In situ biological treatments e.g., enhanced bioremediation, phytoremediation, bioventing
  • Ex situ biological treatments e.g., bioreaction, biopiles, landfarming, slurry phase biological treatment
  • In situ physical and chemical treatments - Include the purchase of chemicals for remediation of soil, sediment, sludge, ground water, surface water or leachate. e.g., biochar, chemical oxidation, fracturing, soil flushing, soil vapour extraction, solidification, stabilization, air sparging, bioslurping, chemical oxidation, directional wells, dual phase extraction, thermal treatment, hydrofracturing enhancements, in-well air stripping, passive and reactive treatment walls
  • Ex situ physical and chemical treatments - Include the purchase of chemicals for remediation of soil, sediment, sludge, ground water, surface water and leachate. e.g., chemical extraction, chemical reduction and oxidation, dehalogenation, separation, soil washing, solidification, stabilization, adsorption and absorption, advanced oxidation, air stripping, ion exchange, precipitation, flocculation, coagulation, separation, sprinkler irrigation
  • In situ thermal treatments - e.g., hot air injection, electrical resistance
  • Ex situ thermal treatments - e.g., incineration, pyrolysis, thermal desorption
  • Containment
  • Other goods or technologies related to the protection and the remediation of soil, groundwater, surface water and leachate technologies - Specify other goods or technologies related to the protection and remediation of soil, groundwater, surface water and leachate technologies:
  • No purchases

Protection of biodiversity and habitat

21. Report this establishment's capital expenditures and operating expenses for the protection of biodiversity and habitat during the 2020 fiscal year.

Include expenditures related to:

  • the protection, restoration and rehabilitation of wildlife and habitat
  • purchase of land for protection of species and habitat
  • assessments and audits
  • activities related to measurement, control, laboratories
  • both own-account expenses (e.g., employee wages and salaries) and purchased goods and services.

Exclude expenditures related to:

  • site reclamation and decommissioning (to be reported in question 18)
  • landscaping for decorative purposes, the rehabilitation of predominantly build-up landscapes, or other activities undertaken for predominantly aesthetic reasons
  • weed control, maintenance of game or timber stocks, or other activities undertaken for predominantly economic reasons
  • protection and rehabilitation of historic monuments or predominantly built-up or urban landscapes (unless the purpose is the protection of biodiversity and habitat)
  • foregone revenues resulting from regulations or conventions that reduce the allowable harvest (e.g., for logging activities).

If the expenditure is zero, enter '0' in the corresponding box. When precise figures are not available, provide your best estimate.

Report this establishment's capital expenditures and operating expenses for the protection of biodiversity and habitat during the 2020 fiscal year.
  CAN$
Capital expenditures  
Operating expenses  
Total expenditures  

22. Of the total expenditures reported in question 21, report the proportion spent on purchased goods, technologies and services.

Purchased goods, technologies and services are goods, technologies and services provided by an outside company or service provider. They exclude in-house or own-account expenditures, such as employee wages and salaries.

When precise figures are not available, provide your best estimate.

Percentage spent

Noise and vibration abatement

23. Report this establishment's capital expenditures and operating expenses for noise and vibration abatement during the 2020 fiscal year.

Include expenditures related to:

  • the control, reduction and abatement of noise and vibration, including preventive in-process modifications at the source, the construction of anti-noise or anti-vibration facilities, or any other related activities
  • assessments and audits
  • activities related to measurement, control, laboratories
  • both own-account expenses (e.g., employee wages and salaries) and purchased goods and services.

Exclude expenditures related to workers' health and safety.

If the expenditure is zero, enter '0' in the corresponding box. When precise figures are not available, provide your best estimate.

Report this establishment's capital expenditures and operating expenses for noise and vibration abatement during the 2020 fiscal year.
  CAN$
Capital expenditures  
Operating expenses  
Total expenditures  

24. Of the total expenditures reported in question 23, report the proportion spent on purchased goods, technologies and services.

Purchased goods, technologies and services are goods, technologies and services provided by an outside company or service provider. They exclude in-house or own-account expenditures, such as employee wages and salaries.

When precise figures are not available, provide your best estimate.

Percentage spent

Protection against radiation

25. Report this establishment's capital expenditures and operating expenses for the protection against radiation during the 2020 fiscal year.

Include expenditures related to:

  • protection of ambient media
  • the transport and treatment of high-level radioactive waste
  • assessments and audits
  • activities related to measurement, control, laboratories
  • both own-account expenses (e.g., employee wages and salaries) and purchased goods and services.

Exclude expenditures related to:

  • the prevention of technological hazards (e.g., external safety of nuclear power plants)
  • workers' health and safety
  • management of low-level radioactive waste (reported in question 1).

If the expenditure is zero, enter '0' in the corresponding box. When precise figures are not available, provide your best estimate.

Report this establishment's capital expenditures and operating expenses for the protection against radiation during the 2020 fiscal year.
  CAN$
Capital expenditures  
Operating expenses  
Total expenditures  

26. Of the total expenditures reported in question 25, report the proportion spent on purchased goods, technologies and services.

Purchased goods, technologies and services are goods, technologies and services provided by an outside company or service provider. They exclude in-house or own-account expenditures, such as employee wages and salaries. When precise figures are not available, provide your best estimate.

Percentage spent

Environmental charges

27. Report the amount this establishment paid in environmental charges during the 2020 fiscal year.

Exclude expenditures on environmental charges already reported in another question. If the expenditure is zero, enter '0' in the corresponding box. When precise figures are not available, provide your best estimate.

Report the amount this establishment paid in environmental charges during the 2020 fiscal year.
  CAN$
Permits, approvals, fees, special assessments and related fees  
Carbon offset credits  
Fines, penalties or damage awards paid to government agencies or individuals, or other charges paid to regulating bodies in order to allow operations to take place at this establishment  
All other environmental charges - Specify all other environmental charges:   
Total environmental charges  

Other environmental protection activities

28. Report this establishment's capital expenditures and operating expenses for environmental protection during the 2020 fiscal year that were not already reported.

Include expenditures related to:

  • the general administration of your environmental program
  • environmental training and information programs not already reported
  • assessments or audits not already reported
  • any other environmental protection expenditures not already reported
  • both own-account expenses (e.g., employee wages and salaries) and purchased goods and services.

Exclude expenditures related to:

  • research and development (not covered in this survey)
  • heat or energy savings and management (to be reported in question 31a)
  • fuel efficient vehicles and transportation goods or technologies (to be reported in question 31b)
  • the production of renewable or clean energy (to be reported in questions 31c and 31e)
  • the purchase of biofuels, biochemicals or biomaterials (to be reported in question 31d).

If the expenditure is zero, enter '0' in the corresponding box. When precise figures are not available, provide your best estimate.

Report this establishment's capital expenditures and operating expenses for environmental protection during the 2020 fiscal year that were not already reported.
  CAN$
Capital expenditures  
Operating expenses  
Total expenditures  

29. Of the total expenditures reported in question 28, report the proportion spent on purchased goods, technologies and services.

Purchased goods, technologies and services are goods, technologies and services provided by an outside company or service provider. They exclude in-house or own-account expenditures, such as employee wages and salaries.

When precise figures are not available, provide your best estimate.

Percentage spent

30. Describe any changes or events that may have affected the reported environmental protection values for this establishment compared to the last reporting period.

e.g., We installed low-NOx burners in 2020 – for air pollution management

Environmental technologies and processes

31. During the 2020 fiscal year, did this establishment have expenditures in any of the following categories?

Include both operating and capital expenditures.

During the 2020 fiscal year, did this establishment have expenditures in any of the following categories?
  Yes No
Heat or energy savings and management    
Clean vehicles and transportation equipment    
Production of energy from renewable sources, whether for sale or own use    
Purchase of biofuels, biochemical products or biomaterials    
Production of nuclear energy    

Heat or energy savings and management

32. Report this establishment's capital expenditures and operating expenses related to the management of energy resources through heat or energy savings and management during the 2020 fiscal year.

Include expenditures related to:

  • energy savings through in-process modifications
  • purchase of efficient industrial or commercial equipment, demand management technologies, or energy storage technologies
  • purchase of energy efficiency services or smart grid services
  • building and fleet energy audits
  • thermal insulation activities
  • energy recovery activities
  • assessments and audits
  • activities related to measurement, control, laboratories
  • more efficient furnace
  • lighting upgrades
  • both own-account expenses (e.g., employee wages and salaries) and purchased goods, technologies and services.

Exclude expenditures related to:

  • pollution abatement and control or prevention for air pollution (to be reported in question 12)
  • the purchase of energy-efficient vehicles (to be reported in question 37)
  • renewable/clean energy production (to be reported in questions 39 and 43)
  • the purchase of biofuels (to be reported in question 42).

If the expenditure is zero, enter '0' in the corresponding box. When precise figures are not available, provide your best estimate.

Report this establishment's capital expenditures and operating expenses related to the management of energy resources through heat or energy savings and management during the 2020 fiscal year.
  CAN$
Capital expenditures  
Operating expenses  
Total expenditures  

33. Of the total expenditures reported in question 32, report the proportion spent on purchased goods, technologies and services.

Purchased goods, technologies and services are goods, technologies and services provided by an outside company or service provider. They exclude in-house or own-account expenditures, such as employee wages and salaries.

When precise figures are not available, provide your best estimate.

Percentage spent

34. Which of the following goods and technologies related to heat or energy savings and management were purchased by this establishment during the 2020 fiscal year?

Include machinery, equipment, products, and technologies.

Select all that apply.

Efficient industrial or commercial equipment

  • High efficiency burners and boilers e.g., Energy Star
  • High efficiency pumps and motors e.g., Energy Star, NEMA PremiumTM
  • High efficiency industrial or commercial HVAC e.g., Energy Star
  • Combined heat and power generation (CHP/cogeneration)
  • High efficiency industrial or commercial lighting systems e.g., Energy Star
  • Automation and control technologies
  • Energy efficient filters and processes
  • Advanced insulation e.g., super insulating materials (SIMs), vacuum insulation panels (VIP), gas-filled panels (GFP), and aerogel-based products (ABP)
  • Predictive maintenance technologies e.g., twinning, sensors, related software
  • Other efficient industrial or commercial equipment - Specify other efficient industrial or commercial equipment:
  • No purchases

Demand management technologies

  • Smart inverters
  • Smart meters and devices
  • Phasor measurement units
  • Management systems e.g., software
  • Other demand management technologies - Specify other demand management technologies:
  • No purchases

Energy storage technologies

  • Flywheels
  • Equipment for pumped hydro systems
  • Equipment for compressed air systems
  • Advanced batteries e.g., NiCd, NiMH, Li-ion, NaS, NaNiCl, hybrid flow, redox flow, hydrogen storage, synthetic natural gas
  • Fuel cells
  • Thermal storage systems
  • Double-layer capacitors (DLC)
  • Superconducting magnetic energy storage (SMES)
  • Other energy storage technologies - Specify other energy storage technologies:
  • No purchases

35. Which of the following services related to heat or energy savings and management were purchased by this establishment during the 2020 fiscal year?

Select all that apply.

Energy efficiency services

  • Green building certification services
  • Building or fleet energy audit and air leakage testing services
  • Energy management system services
  • Energy monitoring services
  • Energy demand control services
  • Data analysis and modelling services
  • Process integration services
  • Services for advanced insulation activities
  • Energy efficiency consulting
  • Predictive maintenance services
  • Other energy efficiency services - Specify other energy efficiency services:
  • No purchases

Smart grid services 

  • Energy storage solutions
  • Microgrid solutions
  • Cyber security services
  • Data management and communications solutions
  • Demand management services e.g., peak load management and load following
  • Monitoring solutions services e.g., self-healing grids
  • Other smart grid services - Specify other smart grid services:
  • No purchases
36. Report this establishment's expenditures for goods, technologies and services related to the management of energy resources through heat or energy savings and management during the 2020 fiscal year in each of the following categories.
  CAN$
Efficient industrial or commercial equipment  
Demand management technologies  
Energy storage technologies  
Energy efficiency services  
Smart grid services  
Total  

Clean vehicles and transportation equipment

37. Report the amount this establishment spent on the purchase of clean vehicles and transportation equipment during the 2020 fiscal year.

Include the purchase of:

  • electric, hybrid, and fuel cell vehicles (all-types)
  • fuel efficient aircraft
  • electric vehicle infrastructure
  • alternative fuel and refuelling infrastructure
  • low rolling resistance tires
  • vehicle emissions monitoring technologies
  • alternative fuel retrofit technologies
  • equipment or software for vehicle fleet management and logistics.

Exclude:

  • operating and maintenance costs for running clean vehicles
  • expenses for fleet energy audits (to be reported in question 32)
  • any equipment or vehicles for sale.

If the expenditure is zero, enter '0' in the corresponding box. When precise figures are not available, provide your best estimate.

Total expenditures

38. Which of the following clean vehicles and transportation equipment were purchased by this establishment during the 2020 fiscal year?

Select all that apply.

Fuel efficient vehicles

  • Electric vehicles - Include all vehicle-types.
  • Hybrid vehicles - Include all vehicle-types.
  • Fuel cell vehicles - Include all vehicle-types.
  • Fuel efficient aircraft
  • Other clean vehicles - Specify other clean vehicles:
  • No purchases

Clean transportation equipment

  • Electric vehicle infrastructure - Include charging stations.
  • Alternative fuel and refuelling infrastructure - Include hydrogen and natural gas.
  • Low rolling resistance tires
  • Vehicle emission monitoring
  • Alternative fuel retrofit technologies
  • Equipment or software for vehicle fleet management and logistics
  • Other clean transportation equipment - Specify other clean transportation equipment:
  • No purchases

Production of energy from renewable sources

39. Report this establishment's capital expenditures and operating expenses related to the production of energy from renewable sources during the 2020 fiscal year, including both electricity and heat.

Report also the proportion of energy produced from renewable sources for own use.

Include expenditures related to:

  • the production of energy from renewable sources, whether for sale or own use
  • the installation, operation, and maintenance of equipment, including infrastructure to support the production of renewable energy (e.g., costs for approvals and planning, transmission and distribution lines and other infrastructure)
  • the operating and maintenance expenses of existing equipment.

Exclude expenditures related to:

  • the purchase of the feedstock used to produce energy, such as biofuels (to be reported in question 42)
  • the production of nuclear energy (to be reported in question 43)
  • electricity purchased from the grid.

When precise figures are not available, provide your best estimate.

For this question, please report expenditures related to the production of energy from renewable sources, whether for sale or own use.

Renewable energy:

Energy obtained from resources that can be naturally replenished or renewed within a human lifespan, that is, the resource is a sustainable source of energy. This includes: wind, solar, aero-thermal, geothermal, hydrothermal, from wave, tidal and ocean thermal energy, hydropower, biomass, landfill gas, sewage treatment plant gas and biogases.

Report this establishment's capital expenditures and operating expenses related to the production of energy from renewable sources during the 2019 fiscal year, including both electricity and heat.
  Capital expenditures
CAN$
Operating expenses
CAN$
Percentage of energy production for own use
Wind      
Geothermal      
Small hydroelectric facilities      
Large hydroelectric facilities      
Solar      
Bioenergy production      
Waste to energy      
Other energy production from renewable resources 1 - Specify      
Other energy production from renewable resources 2 - Specify      
Other energy production from renewable resources 3 - Specify      
Total expenditures for the production of renewable energy      

40. Which of the following goods or technologies used for the production of renewable energy were purchased by this establishment during the 2020 fiscal year?

Select all that apply.

Wind

  • Wind turbine equipment, nacelle, blades, towers
  • Switchgear, transformers
  • Other goods and technologies related to wind energy - Specify other goods and technologies related to wind energy:
  • No purchases

Geothermal

  • Heat pumps
  • Other goods and technologies used in geothermal energy systems - Specify other goods and technologies used in geothermal energy systems:
  • No purchases

Small hydroelectric facilities

  • Turbines and related components - Exclude wave and tidal energy.
  • Turbines and related components for wave or tidal energy
  • Generators, valves, gates, transformers, switchgear
  • Include components.
  • Other goods and technologies related to small hydroelectric facilities - Specify other goods and technologies related to small hydroelectric facilities:
  • No purchases

Large hydroelectric facilities

  • Turbines and related components - Exclude wave and tidal energy.
  • Turbines and related components for wave or tidal energy
  • Generators, valves, gates, transformers, switchgear - Include components.
  • Other goods and technologies related to large hydroelectric facilities - Specify other goods and technologies related to large hydroelectric facilities:
  • No purchases

Solar energy

  • Active solar heating equipment - e.g., glazed flat plate collectors, glazed evacuated tubes and collectors, unglazed panels and collectors for heating pools, perforated cladding for solar air heating
  • Active solar-power generation equipment - e.g., concentrating mirrors, receivers
  • Photovoltaic energy equipment - e.g., photovoltaic cells, modules, panels and arrays, inverters for solar photovoltaic systems
  • Other goods and technologies related to solar energy - Specify other goods and technologies related to solar energy:
  • No purchases

Production of bioenergy

  • Mixers and centrifuges
  • Filtration systems
  • Biofuel reactors - e.g., distillation towers, pyrolizers, catalyst beds, gasifiers, heat digesters
  • Washers
  • Dryers
  • Heaters
  • Storage systems related to bioenergy production
  • Shredders and chippers
  • Combined heat and power bioenergy systems
  • Domestic woodstoves
  • Biomass-fired industrial boilers
  • Anaerobic digesters
  • Other bioenergy production goods and technologies - Exclude purchased biofuels. - Specify other bioenergy production goods and technologies - Exclude purchased biofuels:
  • No purchases

Waste to energy

  • Liquid organic waste to energy equipment
  • Solid organic waste to energy equipment
  • Other waste to energy goods and technologies - Specify other waste to energy goods and technologies:
  • No purchases

Purchase of biofuels, biochemicals and biomaterials

41. Which of the following biofuels, biochemicals and biomaterials were purchased by this establishment during the 2020 fiscal year?

Select all that apply.

Biofuels

  • Pellets, chips, cubes, briquettes
  • Black pellets
  • Energy logs
  • Biocoal
  • Biochar
  • Ethanol, cellulosic ethanol
  • Biodiesel
  • Renewable diesel
  • Pyrolysis oil
  • Synthetic fuels e.g., DME, Fisher Tropsch fuels, Biojet fuels
  • Bio-oil, pyrolytic oil, biomethanol
  • Biobutanol
  • Biogas
  • Renewable natural gas e.g., biomethane
  • Syngas
  • Biohydrogen
  • Other bioenergy and biofuels - Specify other bioenergy and biofuels:
  • No purchases

Biochemical products

  • Aromatics, amino and organic acids, phenols, polyols
  • Cellulose, hemicellulose, lignin
  • Biochar
  • Bio-oils, lubricants
  • Solvents, adhesives, paints, coatings
  • Biopolymers and resins
  • Biopesticides
  • Biostimulants
  • Additives and catalysts e.g., sodium hydroxide, potassium hydroxide, enzymes
  • Other biochemical products - Specify other biochemical products:
  • No purchases

Biomaterials

  • Mats, cellulose products
  • Bio-based auto parts, building materials, panels, cross laminated timber
  • Plastics, films, foams, hydrogels
  • Nanomaterials and nanocomposites
  • Nanocrystalline cellulose
  • Other biomaterials - Specify other biomaterials:
  • No purchases
42. During the 2020 fiscal year, how much did this establishment spend on purchases in each of the following categories of biofuels, biochemicals and biomaterials?
  CAN$
Biofuels  
Biochemical products  
Biomaterials  
Total expenditures  

Production of nuclear energy

43. Report this establishment's capital expenditures and operating expenses related to the production of nuclear energy during the 2020 fiscal year.

Exclude the costs of any feedstock used to produce energy such as uranium.

If the expenditure is zero, enter '0' in the corresponding box. When precise figures are not available, provide your best estimate.

Report this establishment's capital expenditures and operating expenses related to the production of nuclear energy during the 2020 fiscal year.
  CAN$
Capital expenditures  
Operating expenses  
Total expenditures  

44. Which of the following goods and technologies related to the production of nuclear energy were purchased during the 2020 fiscal year?

Select all that apply.

  • Nuclear reactors or nuclear island components
  • Nuclear fuel handling, processing, and fabrication equipment
  • Other nuclear energy technologies - Specify other nuclear technologies:
  • No purchases

45. Describe any changes or events that may have affected the reported environmental technologies and processes values for this establishment compared to the last reporting period.

e.g., We bought two fuel efficient vehicles in 2020

Drivers and obstacles

46. Which of the following were drivers to the adoption of new or significantly improved clean technologies, systems or equipment for this establishment during the 2020 fiscal year?

Select all that apply.

  • Sufficient return on investment - i.e., sufficient business case
  • Regulations
  • Government incentives
  • Carbon pricing
  • Voluntary agreement
  • Public image
  • Corporate policy
  • Part of regular capital turnover
  • Other drivers - Specify other drivers:
  • There were no drivers during the 2020 fiscal year

47. Which of the following were obstacles to the adoption of new or significantly improved clean technologies, systems or equipment for this establishment during the 2020 fiscal year?

Select all that apply.

  • Lack of regulations
  • Changing regulations
  • Insufficient return on investment - i.e., no business case
  • Difficulty in obtaining financing - e.g., internal, private or government
  • Competing capital investments
  • Lack of information or knowledge related to systems or equipment (new or significantly improved)
  • Lack of available systems or equipment (new or significantly improved)
  • Lack of technical skills required to support this type of investment
  • Lack of technical support or services - e.g., from consultants or vendors
  • Regulatory or policy barriers
  • Organizational structure too inflexible
  • Decisions made by parent, affiliate or subsidiary businesses
  • Difficulty in integrating new technologies with existing infrastructure, systems, standards and processes
  • Other obstacles - Specify other obstacles:
  • There were no obstacles during the 2020 fiscal year

Environmental management practices

48. Did this establishment use an environmental management system during the 2020 fiscal year?

  • Yes
  • No
  • Don't know

49. Did this establishment develop and/or follow a pollution prevention plan during the 2020 fiscal year?

  • Yes
  • No
  • Don't know

50. Did this establishment use Life Cycle Management, Life Cycle Assessment, Design for Environment (DfE) or Ecodesign principles for decision-making during the 2020 fiscal year?

  • Yes
  • No
  • Don't know

51. Was this establishment certified under the ISO 14000 family of environmental management standards during the 2020 fiscal year?

  • Yes
  • No
  • Don't know

52. Did this establishment participate in any environmental voluntary agreements or voluntary environmental programs during the 2020 fiscal year?

e.g., Environmental Performance Agreements (EPAs), Canadian GHG Reductions Registry, Canadian Industry Program for Energy Conservation (CIPEC), Forestry Stewardship Council (FSC), etc.

  • Yes
  • No
  • Don't know

Specify the programs, accords or agreements:

53. Did this establishment have a 'green' procurement policy or guidelines during the 2020 fiscal year?

  • Yes
  • No
  • Don't know

54. Did this establishment have an environmental supply chain management policy during the 2020 fiscal year?

  • Yes
  • No
  • Don't know

55. Did this establishment implement any new or improved environmental processes and practices in response to an environmental supply chain management policy in place at a supplier or client business during the 2020 fiscal year?

  • Yes
  • No
  • Don't know

56. Did this establishment take advantage of any Canadian federal, provincial/territorial, or local government environmental incentive programs, grants, loans, or tax credits during the 2020 fiscal year?

e.g., ecoENERGY Initiatives, Industrial Research Assistance Program (IRAP), SD Tech Fund, or Accelerated Capital Cost Allowance or Scientific Research and Experimental Development (SR&ED) for energy efficiency and renewable energy sources

  • Yes
  • No
  • Don't know

Specify the incentive programs, grants or loans:

57. Did this establishment perform a greenhouse gas emissions inventory during the 2020 fiscal year?

  • Yes
  • No
  • Don't know

58. Did this establishment participate in any form of carbon-trading, either by purchasing or selling carbon offset credits in the 2020 fiscal year?

  • Yes, purchased carbon offset credits only OR purchased more than sold
  • Yes, sold carbon offset credits only OR sold more than purchased
  • No, did not participate in any of the above
  • Don't know

59. Did this establishment participate in any other environmental management practices during the 2020 fiscal year?

  • Yes
  • No
  • Don't know

Specify the other environmental management practices:

Contact person

60. Statistics Canada may need to contact the person who completed this questionnaire for further information.

Is the provided given names and the provided family name the best person to contact?

  • Yes
  • No

Who is the best person to contact about this questionnaire?

  • First name:
  • Last name:
  • Title:
  • Email address:
  • Telephone number (including area code):
  • Extension number (if applicable):
    The maximum number of characters is 5.
  • Fax number (including area code):

Feedback

61. How long did it take to complete this questionnaire?

Include the time spent gathering the necessary information.

  • Hours:
  • Minutes:

62. Do you have any comments about this questionnaire?

Monthly Survey of Manufacturing: National Weighted Rates by Source and Characteristic - May 2021

Text Table 2: National Weighted Rates by Source and Characteristic, May 2021
Table summary
The information is grouped by Sales of goods manufactured, Raw materials and components, Goods / work in process, Finished goods manufactured, Unfilled Orders, Capacity utilization rates (appearing as row headers), and Data source as the first row of column headers, then Response or edited, and Imputed as the second row of column headers, calculated by percentage.
  Data source
Response or edited Imputed
%
Sales of goods manufactured 86.6 13.4
Raw materials and components 77.1 22.9
Goods / work in process 81.2 18.8
Finished goods manufactured 74.7 25.3
Unfilled Orders 90.4 9.6
Capacity utilization rates 66.0 34.0