2015 Annual Survey of Manufacturing and Logging Industries

Supplementary Content

Survey purpose

This questionnaire is to collect additional information on purchases and the harvest of logs and bolts to be used in manufacturing of softwood lumber and other related softwood lumber products. Please access Information for survey participantsfor more information on this survey.

Security of emails and faxes

Statistics Canada advises you that there could be a risk of disclosure during facsimile or email. However upon receipt, Statistics Canada will provide the guaranteed level of protection afforded all information collected under the authority of the Statistics Act. Note: Our online questionnaires are secure, there is no risk of data interception when responding to Statistics Canada online surveys.

Confidentiality

The Statistics Act protects the confidentiality of information collected by Statistics Canada.

Data-sharing agreements

To reduce respondent burden, Statistics Canada has entered into data- sharing agreements with provincial and territorial statistical agencies and other government organizations, which have agreed to keep the data confidential and use them only for statistical purposes.

Information on confidentiality, data-sharing agreements and record linkages can be found on the last page of this questionnaire.

Section 1:
Products that were COVERED under the scope of the 2006 Softwood Lumber Agreement Produced from Logs and Bolts

Table 1A - Purchases of logs and bolts to produce products that were COVERED under the scope of the 2006 Softwood Lumber Agreement

  • For each coniferous species, please provide details of your purchases of logs and bolts used in the production of products that were COVERED under the scope of the 2006 Softwood Lumber Agreement and listed in the table 1B below.
  • Please report log and bolt purchases from other establishments at the value shown on your books of account (i.e. final selling price or book transfer value). For logs and bolts harvested from your establishment’s tenure, report the value shown on your books of account FOB mill gate.
  • Only include softwood logs and bolts purchased and harvested to produce products listed in table 1B. Do not include softwood logs and bolts that were not further manufactured in your business unit and that were resold.
  • Report purchases in thousands of Canadian dollars, report quantities in Cubic Metres.

1) Logs and bolts of spruce, pine and fir (except fuel wood and pulpwood) as raw material (purchased and harvested)

  1. Quantity purchased and harvested
  2. Cost of purchases (FOB mill gate including any stumpage fees paid) '000 CAN$

2) Logs and bolts of hemlock-fir (except fuel wood and pulpwood) as raw material (purchased and harvested)

  1. Quantity purchased and harvested
  2. Cost of purchases (FOB mill gate including any stumpage fees paid) '000 CAN$

3) Logs and bolts of Douglas fir and Western larch (except fuel wood and pulpwood) as raw material (purchased and harvested)

  1. Quantity purchased and harvested
  2. Cost of purchases (FOB mill gate including any stumpage fees paid) '000 CAN$

4) Logs and bolts of Western red cedar (except fuel wood and pulpwood) as raw material (purchased and harvested)

  1. Quantity purchased and harvested
  2. Cost of purchases (FOB mill gate including any stumpage fees paid) '000 CAN$

5) Other logs and bolts of softwood (except fuel wood and pulpwood) as raw material (purchased and harvested)

  1. Quantity purchased and harvested
  2. Cost of purchases (FOB mill gate including any stumpage fees paid) '000 CAN$

Table 1B - Sales of products that were COVERED under the scope of the 2006 Softwood Lumber Agreement

  • For each coniferous species, please provide your sales for the following products that were COVERED under the scope of the 2006 Softwood Lumber Agreement.
  • Please report sales at the value shown on your books of account (i.e. final selling price or book transfer value). If these figures are not available, please provide an estimate based on quantity of logs and bolts used to produce these products.
  • Report sales in thousands of Canadian dollars, net of shipping charges by common or contract carriers, discounts, sales allowances, returned sales, sales taxes, and excise duties and taxes.
  • Include products produced from softwood logs and bolts, but not those produced from lumber.

1) Produced from Logs and bolts of spruce, pine and fir (except fuel wood and pulpwood) as raw material (purchased and harvested)

a) Quantity sold

  1. Coniferous wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed/ finger-jointed, of a thickness exceeding 6 mm (Board feet (lumber), Thousand)
  2. Coniferous wood flooring (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed/ finger-jointed (square feet)
  3. Coniferous wood siding (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed/ finger-jointed (Square feet)
  4. Other coniferous wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces (other than wood moldings and wood dowel rods) whether or not planed, sanded or end-jointed/finger-jointed (Cubic metres)
  5. Coniferous wood continuously shaped along any of its ends, whether or not also continuously shaped along any of its edges or faces, all the foregoing whether or not planed, sanded or end-jointed/finger-jointed (Cubic metres)
  6. Coniferous drilled and notched lumber and angle cut lumber (Cubic metres)

b) Value of sales '000 CAN$

  1. Coniferous wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed/ finger-jointed, of a thickness exceeding 6 mm
  2. Coniferous wood flooring (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed/ finger-jointed
  3. Coniferous wood siding (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed/ finger-jointed
  4. Other coniferous wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces (other than wood moldings and wood dowel rods) whether or not planed, sanded or end-jointed/finger-jointed
  5. Coniferous wood continuously shaped along any of its ends, whether or not also continuously shaped along any of its edges or faces, all the foregoing whether or not planed, sanded or end-jointed/finger-jointed
  6. Coniferous drilled and notched lumber and angle cut lumber

2) Produced from Logs and bolts of hemlock-fir (except fuel wood and pulpwood) as raw material (purchased and harvested)

a) Quantity sold

  1. Coniferous wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed/ finger-jointed, of a thickness exceeding 6 mm (Board feet (lumber), Thousand)
  2. Coniferous wood flooring (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed/ finger-jointed (Square feet)
  3. Coniferous wood siding (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed/ finger-jointed (Square feet)
  4. Other coniferous wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces (other than wood moldings and wood dowel rods) whether or not planed, sanded or end-jointed/finger-jointed (Cubic metres)
  5. Coniferous wood continuously shaped along any of its ends, whether or not also continuously shaped along any of its edges or faces, all the foregoing whether or not planed, sanded or end-jointed/finger-jointed (Cubic metres)
  6. Coniferous drilled and notched lumber and angle cut lumber (Cubic metres)

b) Value of sales '000 CAN$

  1. Coniferous wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed/ finger-jointed, of a thickness exceeding 6 mm
  2. Coniferous wood flooring (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed/ finger-jointed
  3. Coniferous wood siding (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed/ finger-jointed
  4. Other coniferous wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces (other than wood moldings and wood dowel rods) whether or not planed, sanded or end-jointed/finger-jointed
  5. Coniferous wood continuously shaped along any of its ends, whether or not also continuously shaped along any of its edges or faces, all the foregoing whether or not planed, sanded or end-jointed/finger-jointed
  6. Coniferous drilled and notched lumber and angle cut lumber

3) Produced from Logs and bolts of Douglas fir and Western larch (except fuel wood and pulpwood) as raw material (purchased and harvested)

a) Quantity sold

  1. Coniferous wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed/ finger-jointed, of a thickness exceeding 6 mm (Board feet (lumber), Thousand)
  2. Coniferous wood flooring (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed/ finger-jointed (square feet)
  3. Coniferous wood siding (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed/ finger-jointed(Square feet)
  4. Other coniferous wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces (other than wood moldings and wood dowel rods) whether or not planed, sanded or end-jointed/finger-jointed (Cubic metres)
  5. Coniferous wood continuously shaped along any of its ends, whether or not also continuously shaped along any of its edges or faces, all the foregoing whether or not planed, sanded or end-jointed/finger-jointed (Cubic metres)
  6. Coniferous drilled and notched lumber and angle cut lumber (Cubic metres)

b) Value of sales '000 CAN$

  1. Coniferous wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed/ finger-jointed, of a thickness exceeding 6 mm
  2. Coniferous wood flooring (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed/ finger-jointed (square feet)
  3. Coniferous wood siding (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed/ finger-jointed (square feet)
  4. Other coniferous wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces (other than wood moldings and wood dowel rods) whether or not planed, sanded or end-jointed/finger-jointed
  5. Coniferous wood continuously shaped along any of its ends, whether or not also continuously shaped along any of its edges or faces, all the foregoing whether or not planed, sanded or end-jointed/finger-jointed
  6. Coniferous drilled and notched lumber and angle cut lumber

4) Produced from Logs and bolts of Western red cedar (except fuel wood and pulpwood) as raw material (purchased and harvested)

a) Quantity sold

  1. Coniferous wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed/ finger-jointed, of a thickness exceeding 6 mm (Board feet (lumber), Thousand)
  2. Coniferous wood flooring (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed/ finger-jointed (Square feet)
  3. Coniferous wood siding (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed/ finger-jointed (Square feet)
  4. Other coniferous wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces (other than wood moldings and wood dowel rods) whether or not planed, sanded or end-jointed/finger-jointed (Cubic metres)
  5. Coniferous wood continuously shaped along any of its ends, whether or not also continuously shaped along any of its edges or faces, all the foregoing whether or not planed, sanded or end-jointed/finger-jointed (Cubic metres)
  6. Coniferous drilled and notched lumber and angle cut lumber (Cubic metres)

b) Value of sales '000 CAN$

  1. Coniferous wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed/ finger-jointed, of a thickness exceeding 6 mm
  2. Coniferous wood flooring (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed/ finger-jointed
  3. Coniferous wood siding (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed/ finger-jointed
  4. Other coniferous wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces (other than wood moldings and wood dowel rods) whether or not planed, sanded or end-jointed/finger-jointed
  5. Coniferous wood continuously shaped along any of its ends, whether or not also continuously shaped along any of its edges or faces, all the foregoing whether or not planed, sanded or end-jointed/finger-jointed
  6. Coniferous drilled and notched lumber and angle cut lumber

5) Produced from Other logs and bolts of softwood (except fuel wood and pulpwood) as raw material (purchased and harvested)

a) Quantity sold

  1. Coniferous wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed/ finger-jointed, of a thickness exceeding 6 mm (Board feet (lumber), Thousand)
  2. Coniferous wood flooring (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed/ finger-jointed (Square feet)
  3. Coniferous wood siding (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed/ finger-jointed (Square feet)
  4. Other coniferous wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces (other than wood moldings and wood dowel rods) whether or not planed, sanded or end-jointed/finger-jointed (Cubic metres)
  5. Coniferous wood continuously shaped along any of its ends, whether or not also continuously shaped along any of its edges or faces, all the foregoing whether or not planed, sanded or end-jointed/finger-jointed (Cubic metres)
  6. Coniferous drilled and notched lumber and angle cut lumber (Cubic metres)

b) Value of sales '000 CAN$

  1. Coniferous wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed/ finger-jointed, of a thickness exceeding 6 mm
  2. Coniferous wood flooring (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed/ finger-jointed
  3. Coniferous wood siding (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed/ finger-jointed
  4. Other coniferous wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces (other than wood moldings and wood dowel rods) whether or not planed, sanded or end-jointed/finger-jointed
  5. Coniferous wood continuously shaped along any of its ends, whether or not also continuously shaped along any of its edges or faces, all the foregoing whether or not planed, sanded or end-jointed/finger-jointed
  6. Coniferous drilled and notched lumber and angle cut lumber

Table 1C - Sales of co-products produced during the making of products that were COVERED under the scope of the 2006 Softwood Lumber Agreement

Please provide your sales for the following co-products produced during the making of products that were COVERED under the scope of the 2006 Softwood Lumber Agreement listed in the table 1B above.

  • Please report sales at the value shown on your books of account (i.e. final selling price or book transfer value). If these figures are not available, please provide an estimate based on quantity of logs and bolts used to produce these products.
  • Report sales in thousands of Canadian dollars, net of shipping charges by common or contract carriers, discounts, sales allowances, returned sales, sales taxes, and excise duties and taxes.
  • Include co-products produced during the production of products listed in table 1B from softwood logs and bolts.
  • If a co-product is consumed in the production of a higher-value co-product, ONLY report the quantity sold and the value of the higher-value co-product.

Produced from softwood logs and bolts as raw materials (purchased and harvested)
[NOTE: Softwood logs and bolts include: Spruce, pine, fir, hemlock-fir, Douglas fir, Western larch, Western red cedar and other logs and bolts of softwood (except fuel wood and pulpwood) ]

1) Softwood Chips

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

2) Softwood Shavings

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

3) Softwood Sawdust (except agglomerated)

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

4) Agglomerated sawdust pellets of softwood, except fuel

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

5) Animal bedding made from softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

6) Hog fuel made from softwood
Note: Do not include the volume or value of hog fuel, or other wood fuels, used to produce electricity, steam, or heated or cooled air or water, to the extent that these higher-value co-products are reported elsewhere in table 1C.

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

7) Mulch made from softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

8) Softwood bark (Oven Dry Metric Tonne)

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

9) Trim blocks made from softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

10) Wood flour, of softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

11) Wood wool, of softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

12) Dunnage used for packing, of softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

13) Firelogs of agglomerated sawdust, of softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

14) Firelogs of compressed sawdust, of softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

15) Fuel products of waste softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

16) Fuel wood in logs, pellets and briquettes made from compacted softwood by-products

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

17) Fuel wood in logs, pellets and briquettes made from compacted softwood waste

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

18) Wooden pellets fuel, of softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

19) Other solid fuel products, not elsewhere classified
Examples:

  • wood charcoal, whether or not agglomerated
  • wood charcoal briquettes
  • wood creosote
  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

20) Waste and scrap of softwood (except by-products and peeler log cores)
Examples:

  • mill ends of softwood
  • softwood waste, except sawdust and shavings
  • waste and scrap of softwood (except by-products and peeler log cores)
  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

21) Steam
Note: To the extent electricity, heated air or heated water is produced from steam, do not include the volumes and values of the steam used to produce electricity, heated air or heated water here. Do not include amounts of steam generated from auxiliary fuel (e.g. natural gas)

  1. Quantity sold (Gigajoules)
  2. Value of sales '000 CAN$

22) Heated or cooled air and water
Do not include amounts of heated or cooled air and water generated from auxiliary fuel (e.g. natural gas)

  1. Quantity sold (Gigajoules)
  2. Value of sales '000 CAN$

23) Electricity
Do not include amounts of electricity generated from auxiliary fuel (e.g. natural gas). Include the value of electricity generation used to displace load as well as the value of surplus electricity that is exported from your establishment.

  1. Quantity sold (Megawatt hours)
  2. Value of sales '000 CAN$

24) All other output products of softwood, not elsewhere specified

  1. Value of sales '000 CAN$

Section 2:
Products that were NOT COVERED under the scope of the 2006 Softwood Lumber Agreement Produced from Logs and Bolts

Table 2A Purchases of logs and bolts to produce products that were NOT COVERED under the scope of the 2006 Softwood Lumber Agreement

  • For each coniferous species, please provide details of your purchases of logs and bolts used in the production of products that were NOT COVERED under the 2006 Softwood Lumber Agreement and which are listed in the table 2B below.
  • Please report purchases from other establishments at the value shown on your books of account (i.e. final selling price or book transfer value). For logs and bolts harvested from your establishment’s tenure, report the value shown on your books of account FOB mill gate.
  • Only include softwood logs and bolts purchased and harvested to produce products listed in table 2B. Do not include softwood logs and bolts that were not further manufactured or altered and that were resold.
  • Report purchases in thousands of Canadian dollars, report quantities in Cubic Metres.

1) Logs and bolts of spruce, pine and fir (except fuel wood and pulpwood) as raw material (purchased and harvested)

  1. Quantity purchased and harvested
  2. Cost of purchases (FOB mill gate including any stumpage fees paid) '000 CAN$

2) Logs and bolts of hemlock-fir (except fuel wood and pulpwood) as raw material (purchased and harvested)

  1. Quantity purchased and harvested
  2. Cost of purchases (FOB mill gate including any stumpage fees paid) '000 CAN$

3) Logs and bolts of Douglas fir and Western larch (except fuel wood and pulpwood) as raw material purchased and harvested

  1. Quantity purchased and harvested
  2. Cost of purchases (FOB mill gate including any stumpage fees paid) '000 CAN$

4) Logs and bolts of Western red cedar (except fuel wood and pulpwood) as raw material purchased and harvested

  1. Quantity purchased and harvested
  2. Cost of purchases (FOB mill gate including any stumpage fees paid) '000 CAN$

5) Other logs and bolts of softwood (except fuel wood and pulpwood) as raw material (purchased and harvested)

  1. Quantity purchased and harvested
  2. Cost of purchases (FOB mill gate including any stumpage fees paid) '000 CAN$

Table 2B - Sales of softwood products that were NOT COVERED under the scope of the 2006 Softwood Lumber Agreement

  • For each coniferous species, please provide your sales for the following products that were NOT COVERED under the scope of the 2006 Softwood Lumber Agreement.
  • Please report sales at the value shown on your books of account (i.e. final selling price or book transfer value). If these figures are not available please provide an estimate based on quantity of logs and bolts used to produce these products.
  • Report sales in thousands of Canadian dollars, net of shipping charges by common or contract carriers, discounts, sales allowances, returned sales, sales taxes, and excise duties and taxes.
  • Include products produced from softwood logs and bolts, but not those produced from lumber.

1) Produced from Logs and bolts of spruce, pine and fir (except fuel wood and pulpwood) as raw material (purchased and harvested)

a) Quantity sold

  1. Fuel wood of softwood (includes fuel wood of softwood in billets, fuel wood of softwood in faggots, fuel wood of softwood in logs and fuel wood of softwood in twigs) (Cubic Metres)
  2. Rough untreated poles, posts and piling of softwood (includes untreated coniferous fence posts, untreated coniferous telegraph poles, untreated softwood hewn wood products (except sawn), untreated softwood poles (except sawn) ) (Cubic Metres)
  3. Shakes and shingles of softwood (Square Metres)
  4. Untreated wood ties of softwood (Board feet (lumber), Thousand)
  5. Treated wood poles, piles and posts of softwood (Cubic Metres)
  6. Other treated softwood products (including treated softwood lumber products) (Board feet (lumber), Thousand)

b) Value of sales '000 CAN$

  1. Fuel wood of softwood (includes fuel wood of softwood in billets, fuel wood of softwood in faggots, fuel wood of softwood in logs and fuel wood of softwood in twigs)
  2. Rough untreated poles, posts and piling of softwood (includes untreated coniferous fence posts, untreated coniferous telegraph poles, untreated softwood hewn wood products (except sawn), untreated softwood poles (except sawn) )
  3. Shakes and shingles of softwood
  4. Untreated wood ties of softwood
  5. Treated wood poles, piles and posts of softwood
  6. Other treated softwood products (including treated softwood lumber products)
  7. Trusses
  8. Truss Kits
  9. I-Joist Beams
  10. Pallets
  11. Pallet Kits
  12. Garage doors
  13. Garage Door Parts or Kits
  14. Door Frame Kits
  15. Edge-glued Wood
  16. Complete Door Frames
  17. Complete Window Frames
  18. Window Frame Kits
  19. Furniture
  20. Furniture Kits
  21. Stringers (pallet components used for runners) that meet the specifications in the SLA 2006
  22. Assembled Box Spring Frames
  23. Box Spring Frame Kits that meet the Specifications in Annex 1A of the SLA 2006
  24. Radius-cut Box-Spring-Frame Components, that meet the Specifications in Annex 1A of the SLA 2006
  25. Bed Frame Kits
  26. Fence pickets that meet the specifications in Annex 1A of the SLA 2006.
  27. Pointed Stakes
  28. Single Family Home Packages or kits that meet the specifications in Annex 1A of the SLA 2006.
  29. 6mm and thinner lath
  30. Moulding
  31. Finger jointed items (i.e. end-jointed) (that are not grade stamped for construction purposes)
  32. Fruit bins
  33. Fruit bin components
  34. Bridging
  35. Furring strips (nominal dimensions of 1x2,1x3,1x4,2x2)

2) Produced from Logs and bolts of hemlock-fir (except fuel wood and pulpwood) as raw material (purchased and harvested)

a) Quantity sold

  1. Fuel wood of softwood (includes fuel wood of softwood in billets, fuel wood of softwood in faggots, fuel wood of softwood in logs and fuel wood of softwood in twigs) (Cubic Metres)
  2. Rough untreated poles, posts and piling of softwood (includes untreated coniferous fence posts, untreated coniferous telegraph poles, untreated softwood hewn wood products (except sawn), untreated softwood poles (except sawn)) (Cubic Metres)
  3. Shakes and shingles of softwood (Square Metres)
  4. Untreated wood ties of softwood (Board feet (lumber), Thousand)
  5. Treated wood poles, piles and posts of softwood (Cubic Metres)
  6. Other treated softwood products (including treated softwood lumber products) ) (Board feet (lumber), Thousand)
  7. Trusses

b) Value of sales '000 CAN$

  1. Fuel wood of softwood (includes fuel wood of softwood in billets, fuel wood of softwood in faggots, fuel wood of softwood in logs and fuel wood of softwood in twigs)
  2. Rough untreated poles, posts and piling of softwood (includes untreated coniferous fence posts, untreated coniferous telegraph poles, untreated softwood hewn wood products (except sawn), untreated softwood poles (except sawn)
  3. Shakes and shingles of softwood
  4. Untreated wood ties of softwood
  5. Treated wood poles, piles and posts of softwood
  6. Other treated softwood products (including treated softwood lumber products)
  7. Trusses
  8. Truss Kits
  9. I-Joist Beams
  10. Pallets
  11. Pallet Kits
  12. Garage doors
  13. Garage Door Parts or Kits
  14. Door Frame Kits
  15. Edge-glued Wood
  16. Complete Door Frames
  17. Complete Window Frames
  18. Window Frame Kits
  19. Furniture
  20. Furniture Kits
  21. Stringers (pallet components used for runners) that meet the specifications in the SLA 2006
  22. Assembled Box Spring Frames
  23. Box Spring Frame Kits that meet the Specifications in Annex 1A of the SLA 2006
  24. Radius-cut Box-Spring-Frame Components, that meet the Specifications in Annex 1A of the SLA 2006
  25. Bed Frame Kits
  26. Fence pickets that meet the specifications in Annex 1A of the SLA 2006.
  27. Pointed Stakes
  28. Single Family Home Packages or kits that meet the specifications in Annex 1A of the SLA 2006.
  29. 6mm and thinner lath
  30. Moulding
  31. Finger jointed items (i.e. end-jointed) (that are not grade stamped for construction purposes)
  32. Fruit bins
  33. Fruit bin components
  34. Bridging
  35. Furring strips (nominal dimensions of 1x2,1x3,1x4,2x2)

3) Produced from Logs and bolts of Douglas fir and Western larch (except fuel wood and pulpwood) as raw material(purchased and harvested)

a) Quantity sold

  1. Fuel wood of softwood (includes fuel wood of softwood in billets, fuel wood of softwood in faggots, fuel wood of softwood in logs and fuel wood of softwood in twigs) (Cubic Metres)
  2. Rough untreated poles, posts and piling of softwood (includes untreated coniferous fence posts, untreated coniferous telegraph poles, untreated softwood hewn wood products (except sawn), untreated softwood poles (except saw )) (Cubic Metres)
  3. Shakes and shingles of softwood (Square Metres)
  4. Untreated wood ties of softwood (Board feet (lumber), Thousand)
  5. Treated wood poles, piles and posts of softwood (Cubic Metres)
  6. Other treated softwood products (including treated softwood lumber products) (Board feet (lumber), Thousand)

b) Value of sales '000 CAN$

  1. Fuel wood of softwood (includes fuel wood of softwood in billets, fuel wood of softwood in faggots, fuel wood of softwood in logs and fuel wood of softwood in twigs)
  2. Rough untreated poles, posts and piling of softwood (includes untreated coniferous fence posts, untreated coniferous telegraph poles, untreated softwood hewn wood products (except sawn), untreated softwood poles (except sawn) )
  3. Shakes and shingles of softwood
  4. Untreated wood ties of softwood
  5. Treated wood poles, piles and posts of softwood
  6. Other treated softwood products (including treated softwood lumber products)
  7. Trusses
  8. Truss Kits
  9. I-Joist Beams
  10. Pallets
  11. Pallet Kits
  12. Garage Doors
  13. Garage Door Parts or Kits
  14. Door Frame Kits
  15. Edge-glued Wood
  16. Complete Door Frames
  17. Complete Window Frames
  18. Window Frame Kits
  19. Furniture
  20. Furniture Kits
  21. Stringers (pallet components used for runners) that meet the specifications in the SLA 2006
  22. Assembled Box Spring Frames
  23. Box Spring Frame Kits that meet the Specifications in Annex 1A of the SLA 2006
  24. Radius-cut Box-Spring-Frame Components, that meet the Specifications in Annex 1A of the SLA 2006
  25. Bed Frame Kits
  26. Fence pickets that meet the specifications in Annex 1A of the SLA 2006.
  27. Pointed Stakes
  28. Single Family Home Packages or kits that meet the specifications in Annex 1A of the SLA 2006.
  29. 6mm and thinner lath
  30. Moulding
  31. Finger jointed items (i.e. end-jointed) (that are not grade stamped for construction purposes)
  32. Fruit bins
  33. Fruit bin components
  34. Bridging
  35. Furring strips (nominal dimensions of 1x2,1x3,1x4,2x2)

4) Produced from Logs and bolts of Western red cedar (except fuel wood and pulpwood) as raw material (purchased and harvested)

a) Quantity sold

  1. Fuel wood of softwood (includes fuel wood of softwood in billets, fuel wood of softwood in faggots, fuel wood of softwood in logs and fuel wood of softwood in twigs) (Cubic Metres)
  2. Rough untreated poles, posts and piling of softwood (includes untreated coniferous fence posts, untreated coniferous telegraph poles, untreated softwood hewn wood products (except sawn), untreated softwood poles (except sawn)) (Cubic Metres)
  3. Shakes and shingles of softwood (Square metres)
  4. Untreated wood ties of softwood (Board feet (lumber), Thousand)
  5. Treated wood poles, piles and posts of softwood (Cubic Metres)
  6. Other treated softwood products (including treated softwood lumber products) (Board feet (lumber), Thousand)

b) Value of sales '000 CAN$

  1. Fuel wood of softwood (includes fuel wood of softwood in billets, fuel wood of softwood in faggots, fuel wood of softwood in logs and fuel wood of softwood in twigs)
  2. Rough untreated poles, posts and piling of softwood (includes untreated coniferous fence posts, untreated coniferous telegraph poles, untreated softwood hewn wood products (except sawn), untreated softwood poles (except sawn) )
  3. Shakes and shingles of softwood
  4. Untreated wood ties of softwood
  5. Treated wood poles, piles and posts of softwood
  6. Other treated softwood products (including treated softwood lumber products)
  7. Trusses
  8. Truss Kits
  9. I-Joist Beams
  10. Pallets
  11. Pallet Kits
  12. Garage Doors
  13. Garage Door Parts or Kits
  14. Door Frame Kits
  15. Edge-glued Wood
  16. Complete Door Frames
  17. Complete Window Frames
  18. Window Frame Kits
  19. Furniture
  20. Furniture Kits
  21. Stringers (pallet components used for runners) that meet the specifications in the SLA 2006
  22. Assembled Box Spring Frames
  23. Box Spring Frame Kits that meet the Specifications in Annex 1A of the SLA 2006
  24. Radius-cut Box-Spring-Frame Components, that meet the Specifications in Annex 1A of the SLA 2006
  25. Bed Frame Kits
  26. Fence pickets that meet the specifications in Annex 1A of the SLA 2006.
  27. Pointed Stakes
  28. Single Family Home Packages or kits that meet the specifications in Annex 1A of the SLA 2006.
  29. 6mm and thinner lath
  30. Moulding
  31. Finger jointed items (i.e. end-jointed) (that are not grade stamped for construction purposes)
  32. Fruit bins
  33. Fruit bin components
  34. Bridging
  35. Furring strips (nominal dimensions of 1x2,1x3,1x4,2x2)

5) Produced from Other logs and bolts of softwood (except fuel wood and pulpwood) as raw material (purchased and harvested)

a) Quantity sold

  1. Fuel wood of softwood (includes fuel wood of softwood in billets, fuel wood of softwood in faggots, fuel wood of softwood in logs and fuel wood of softwood in twigs) (Cubic Metres)
  2. Rough untreated poles, posts and piling of softwood (includes untreated coniferous fence posts, untreated coniferous telegraph poles, untreated softwood hewn wood products (except sawn), untreated softwood poles (except sawn)) (Cubic Metres)
  3. Shakes and shingles of softwood (Square metres)
  4. Untreated wood ties of softwood (Board feet (lumber), Thousand)
  5. Treated wood poles, piles and posts of softwood (Cubic Metres)
  6. Other treated softwood products (including treated softwood lumber products) (Board feet (lumber), Thousand)

b) Value of sales '000 CAN$

  1. Fuel wood of softwood (includes fuel wood of softwood in billets, fuel wood of softwood in faggots, fuel wood of softwood in logs and fuel wood of softwood in twigs)
  2. Rough untreated poles, posts and piling of softwood (includes untreated coniferous fence posts, untreated coniferous telegraph poles, untreated softwood hewn wood products (except sawn), untreated softwood poles (except sawn) )
  3. Shakes and shingles of softwood
  4. Untreated wood ties of softwood
  5. Treated wood poles, piles and posts of softwood
  6. Other treated softwood products (including treated softwood lumber products)
  7. Trusses
  8. Truss Kits
  9. I-Joist Beams
  10. Pallets
  11. Pallet Kits
  12. Garage Doors
  13. Garage Door Parts or Kits
  14. Door Frame Kits
  15. Edge-glued Wood
  16. Complete Door Frames
  17. Complete Window Frames
  18. Window Frame Kits
  19. Furniture
  20. Furniture Kits
  21. Stringers (pallet components used for runners) that meet the specifications in the SLA 2006
  22. Assembled Box Spring Frames
  23. Box Spring Frame Kits that meet the Specifications in Annex 1A of the SLA 2006
  24. Radius-cut Box-Spring-Frame Components, that meet the Specifications in Annex 1A of the SLA 2006
  25. Bed Frame Kits
  26. Fence pickets that meet the specifications in Annex 1A of the SLA 2006.
  27. Pointed Stakes
  28. Single Family Home Packages or kits that meet the specifications in Annex 1A of the SLA 2006.
  29. 6mm and thinner lath
  30. Moulding
  31. Finger jointed items (i.e. end-jointed) (that are not grade stamped for construction purposes)
  32. Fruit bins
  33. Fruit bin components
  34. Bridging
  35. Furring strips (nominal dimensions of 1x2,1x3,1x4,2x2)

Table 2C - Sales of co-products produced during the making of products that were NOT COVERED under the scope of the 2006 Softwood Lumber Agreement

  • Please provide your sales for the following co-products produced during the making of products that were NOT COVERED under the 2006 Softwood Lumber Agreement listed in the table 2B above. Please report sales at the value shown on your books of account (i.e. final selling price or book transfer value). If these figures are not available, please provide your estimate based on quantity of logs and bolts used to produce these products.
  • Report sales in thousands of Canadian dollars, net of shipping charges by common or contract carriers, discounts, sales allowances, returned sales, sales taxes, and excise duties and taxes.
  • Include co-products produced during the production of products listed in table 2B from softwood logs and bolts.
  • If a co-product is consumed in the production of a higher-value co-product, ONLY report the quantity sold and the value of the higher-value co-product.

Produced from softwood logs and bolts as raw materials (purchased and harvested)
[NOTE: Softwood logs and bolts include: Spruce, pine, fir, hemlock-fir, Douglas fir, Western larch, Western red cedar and other logs and bolts of softwood (except fuel wood and pulpwood)]

1) Softwood Chips

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

2) Softwood Shavings

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

3) Softwood Sawdust (except agglomerated)

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

4) Agglomerated sawdust pellets of softwood, except fuel

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

5) Animal bedding made from softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

6) Hog fuel made from softwood
Note: Do not include the volume or value of hog fuel, or other wood fuels, used to produce electricity, steam, or heated or cooled air or water, to the extent that these higher-value co-products are reported elsewhere in table 1C.

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

7) Mulch made from softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

8) Softwood bark

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

9) Trim blocks made from softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

10) Wood flour, of softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

11) Wood wool, of softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

12) Dunnage used for packing, of softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

13) Firelogs of agglomerated sawdust, of softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

14) Firelogs of compressed sawdust, of softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

15) Fuel products of waste softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

16) Fuel wood in logs, pellets and briquettes made from compacted softwood by-products

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

17) Fuel wood in logs, pellets and briquettes made from compacted softwood waste

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

18) Wooden pellets fuel, of softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

19) Other solid fuel products, not elsewhere classified
Examples:

  • wood charcoal, whether or not agglomerated
  • wood charcoal briquettes
  • wood creosote
  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

20) Waste and scrap of softwood (except by-products and peeler log cores)
Examples:

  • mill ends of softwood
  • softwood waste, except sawdust and shavings
  • waste and scrap of softwood (except by-products and peeler log cores)
  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

21) Steam
Note: To the extent electricity, heated air or heated water is produced from steam do not include the volumes and values of the steam used to produce electricity, heated air or heated water here. Do not include amounts of steam generated from auxiliary fuel (e.g. natural gas)

  1. Quantity sold (Gigajoules)
  2. Value of sales '000 CAN$

22) Heated or cooled air and water
Do not include amounts of heated or cooled air and water generated from auxiliary fuel (e.g. natural gas)

  1. Quantity sold (Gigajoules)
  2. Value of sales '000 CAN$

23) Electricity
Do not include amounts of electricity generated from auxiliary fuel (e.g. natural gas). Include the value of electricity generation used to displace load as well as the value of surplus electricity that is exported from your establishment.

  1. Quantity sold (Megawatt hours)
  2. Value of sales '000 CAN$

24) All other output products of softwood, not elsewhere specified

  1. Quantity sold
  2. Value of sales '000 CAN$

Section 3:
Softwood logs and bolts (purchased and harvested) resold in the same condition

Table 3A - Softwood logs and bolts (purchased and harvested) resold in the same condition

Please provide details for all softwood logs and bolts purchased and harvested by your establishment that have not been processed or altered and have been resold in the same condition.
Values reported in this section should not be included in section 1 or section 2 of this questionnaire.

1) Softwood sawlogs and bolts - purchased/harvested as sawlogs and resold in the same condition as sawlogs

  1. Quantity (purchased and harvested) (Cubic Metres)
  2. Cost of purchases (FOB mill gate including any stumpage fees paid) '000 CAN$
  3. Value of sales '000 CAN$

2) Softwood sawlogs and bolts - purchased/harvested as sawlogs and resold in the same condition as pulpwood logs
Examples:

  • coniferous pulpwood logs
  • peeled balsam fir pulpwood
  • peeled spruce pulpwood
  • softwood pulpwood
  1. Quantity (purchased and harvested) ) (Cubic Metres)
  2. Cost of purchases (FOB mill gate including any stumpage fees paid) '000 CAN$
  3. Value of sales '000 CAN

Section 4:
Products that were COVERED under the scope of the 2006 Softwood Lumber Agreement Produced from Softwood Lumber

Table 4A - Purchases of softwood lumber to produce remanufactured softwood lumber products COVERED under the 2006 Softwood Lumber Agreement.

  • For each coniferous species, please provide ONLY your purchases of softwood lumber used in the production of the products listed in table 4B.
  • Please report purchases at the value shown on your books of account (i.e. final selling price or book transfer value).
  • Only include softwood lumber purchased to produce products listed in table 4B. Do not include lumber that was resold. Report purchases in thousands of Canadian dollars, report quantities in Board feet (lumber), Thousand.

1) Softwood lumber of spruce, pine and fir (except tongue and groove and other edge worked lumber)

  1. Quantity purchased for use in the production of all outputs below
  2. Cost of softwood lumber purchased '000 CAN$

2) Softwood lumber of hemlock-fir (except tongue and groove and other edge worked lumber)

  1. Quantity purchased for use in the production of all outputs below
  2. Cost of softwood lumber purchased '000 CAN$

3) Softwood lumber of Douglas fir and Western Larch (except tongue and groove and other edge worked lumber)

  1. Quantity purchased for use in the production of all outputs below
  2. Cost of softwood lumber purchased '000 CAN$

4) Softwood lumber of Western red cedar (except tongue and groove and other edge worked lumber)

  1. Quantity purchased for use in the production of all outputs below
  2. Cost of softwood lumber purchased '000 CAN$

5) Softwood lumber of other softwood (except tongue and groove and other edge worked lumber)

  1. Quantity purchased for use in the production of all outputs below
  2. Cost of softwood lumber purchased '000 CAN$

Table 4B - Sales of outputs COVERED under the scope of the 2006 Softwood Lumber Agreement and made from softwood lumber

  • Please provide your sales for the following products that were COVERED under the scope of the 2006 Softwood Lumber Agreement.
  • Please report sales at the value shown on your books of account (i.e. final selling price or book transfer value). If these figures are not available, please provide your estimate based on quantity of lumber used to produce these products.
  • Report sales in thousands of Canadian dollars, net of shipping charges by common or contract carriers, discounts, sales allowances, returned sales, sales taxes, and excise duties and taxes.
  • Include products produced from lumber, but not those produced from logs and bolts.

Produced from Softwood Lumber as raw material

[NOTE: Softwood lumber includes: Spruce, pine, fir, hemlock fir, Douglas fir, Western larch, Western red cedar and other softwood (except tongue and groove and other edge worked lumber)]

1) Coniferous Wood Flooring (including strips and friezes for parquet flooring, not assembled) continuously shaped(tongued, grooved, rabbeted, chamfered, V-jointed, beaded, mold ed, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed/finger-jointed

  1. Value of sales '000 CAN$

2) Coniferous Wood siding (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed/finger-jointed

  1. Value of sales '000 CAN$

3) Coniferous wood continuously shaped along any of its ends, whether or not also continuously shaped along any of its edges or faces, all the foregoing whether or not planed, sanded or end-jointed/finger-jointed

  1. Value of sales '000 CAN$

4) Coniferous drilled and notched lumber and angle cut lumber

  1. Value of sales '000 CAN$

Table 4C - Sales of co-products produced during the making of products COVERED under the scope of the 2006 Softwood Lumber Agreement and made from softwood lumber

  • Please provide your sales for the following products produced during the making of products listed in the table 4B above.
  • Please report sales at the value shown on your books of account (i.e. final selling price or book transfer value). If these figures are not available please provide your estimate based on quantity of lumber used to produce these products.
  • Report sales in thousands of Canadian dollars, net of shipping charges by common or contract carriers, discounts, sales allowances, returned sales, sales taxes, and excise duties and taxes. Include co-products produced during the production of products listed in table 4B from softwood lumber.
  • If a co-product is consumed in the production of a higher-value co-product, ONLY report the quantity sold and the value of the higher-value co-product.

Produced from the making of softwood lumber products

[NOTE: Softwood lumber inc ludes: Spruce, pine, fir, hemlock fir, Douglas fir, Western larch, Western red cedar and other softwood (except tongue and groove and other edge worked lumber)]

1) Softwood Chips

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

2) Softwood Shavings

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

3) Softwood Sawdust (except agglomerated)

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

4) Agglomerated sawdust pellets of softwood, except fuel

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

5) Animal bedding made from softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

6) Hog fuel made from softwood

Note: Do not include the volume or value of hog fuel, or other wood fuels, used to produce electricity, steam, or heated or cooled air or water to the extent that these higher-value co-products are reported elsewhere in table 1C.

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

7) Mulch made from softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

8) Softwood bark

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

9) Trim blocks made from softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

10) Wood flour, of softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

11) Wood wool, of softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

12) Dunnage used for packing, of softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

13) Firelogs of agglomerated sawdust, of softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

14) Firelogs of compressed sawdust, of softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

15) Fuel products of waste softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

16) Fuel wood in logs, pellets and briquettes made from compacted softwood by-products

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

17) Fuel wood in logs, pellets and briquettes made from compacted softwood waste

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

18) Wooden pellets fuel, of softwood

  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

19) Other solid fuel products, not elsewhere classified

Examples:

  • wood charcoal, whether or not agglomerated
  • wood charcoal briquettes
  • wood creosote
  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

20) Waste and scrap of softwood (except by-products and peeler log cores)

Examples:

  • mill ends of softwood
  • softwood waste, except sawdust and shavings
  • waste and scrap of softwood (except by-products and peeler log cores)
  1. Quantity sold (Oven Dry Metric Tonne)
  2. Value of sales '000 CAN$

21) Steam

Note: To the extent electricity, heated air or heated water is produced from steam, do not include the volumes and values of the steam used to produce electricity, heated air or heated water here. Do not include amounts of steam generated from auxiliary fuel (e.g. natural gas)

  1. Quantity sold (Gigajoules)
  2. Value of sales '000 CAN$

22) Heated or cooled air and water

Do not include amounts of heated or cooled air and water generated from auxiliary fuel (e.g. natural gas)

  1. Quantity sold (Gigajoules)
  2. Value of sales '000 CAN$

23) Electricity

Do not include amounts of electricity generated from auxiliary fuel (e.g. natural gas). Include the value of electricity generation used to displace load as well as the value of surplus electricity that is exported from your establishment.

  1. Quantity sold (Megawatt hours)
  2. Value of sales '000 CAN$

24) All other output products of softwood, not elsewhere specified

  1. Quantity sold
  2. Value of sales '000 CAN$

Contact Person
Name of person to contact about this Questionnaire:

  1. First Name
  2. Last Name
  3. Title
  4. Email address
  5. Telephone number
  6. Extension number
  7. Fax number

How long did you spend collecting the data and completed the questionnaire?

  1. Hours
  2. Minutes

General Information

Confidentiality

Your answers are confidential.
Statistics Canada is prohibited by law from releasing any information it collects which could identify any person, business, or organization, unless consent has been given by the respondent or as permitted by the Statistics Act. Statistics Canada will use information from this survey for statistical purposes.

Data-sharing agreements

To reduce respondent burden, Statistics Canada has entered into data-sharing agreements with provincial and territorial statistical agencies and other government organizations, which have agreed to keep the data confidential and use them only for statistical purposes. Statistics Canada will only share data from this survey with those organizations that have demonstrated a requirement to use the data.

Section 11 of the Statistics Act provides for the sharing of information with provincial and territorial statistical agencies that meet certain conditions. These agencies must have the legislative authority to collect the same information, on a mandatory basis, and the legislation must provide substantially the same provisions for confidentiality and penalties for disclosure of confidential information as the Statistics Act. Because these agencies have the legal authority to compel businesses to provide the same information, consent is not requested and businesses may not object to the sharing of the data.

For this survey, there are Section 11 agreements with the provincial and territorial statistical agencies of Newfoundland and Labrador, Nova Scotia, New Brunswick, Quebec, Ontario, Manitoba, Saskatchewan, Alberta, British Columbia and the Yukon. The shared data will be limited to information pertaining to business establishments located within the jurisdiction of the respective province or territory.

Section 12 of the Statistics Act provides for the sharing of information with federal, provincial or territorial government organizations. Under Section 12, you may refuse to share your information with any of these organizations by writing a letter of objection to the Chief Statistician and returning it with the completed questionnaire. Please specify the organizations with which you do not want to share your data. For agreements with provincial and territorial government organizations, the shared data will be limited to information pertaining to business establishments located within the jurisdiction of the respective province or territory.

For all manufacturing industries — there are Section 12 agreements with the statistical agencies of Prince Edward Island, Northwest Territories and Nunavut, as well as with the Quebec Forest Industry Council, the Ministère de l’Énergie et des Ressources naturelles du Québec, the Ministère des Forêts, de la Faune et des Parcs du Québec, the Ontario Ministry of Northern Development and Mines, the Ontario Ministry of Natural Resources and Forestry, the Manitoba Conservation and Water Stewardship, the Saskatchewan Ministry of the Economy, the Alberta Ministry of Agriculture and Forestry, the British Columbia Ministry of Forests, Lands and Natural Resource Operations, Environment Canada, Natural Resources Canada and the National Energy Board.

For establishments in non-ferrous metal (and aluminum) smelting and refining, clay building material and refractory manufacturing, cement manufacturing and lime manufacturing — there are Section 12 agreements with the Newfoundland and Labrador Department of Natural Resources, the New Brunswick Department of Energy and Mines, the Manitoba Department of Mineral Resources, the British Columbia Ministry of Energy and Mines and the British Columbia Ministry of Natural Gas Development.

Authorized disclosure

Section 17 of the federal Statistics Act allows for the disclosure of a list of individual establishments, firms or businesses showing information including the establishments’ names and locations (province, territory and municipality) and North American Industrial Classification System (NAICS) codes. The disclosure of these lists may be authorized in order to aid analysts in the interpretation of the data from the Annual Survey of Manufacturing (Logging industries).

Record linkages

To enhance the data from this survey and to minimize the reporting burden, Statistics Canada may combine it with information from other surveys or from administrative sources.

Thank you for completing this questionnaire.

Please retain a copy for your records.

Visit our website